1998 gmc safari cam sensor

• Forum Listing
• Marketplace
• Advanced Search
• Astro/Safari Vans

Location of Camshaft Position Sensor on my 1998

• Add to quote

Can anyone tell me where this things is and how hard is it to change? Thanks  

Hey Maher - How did you attach that image of the CPS drawing? You've got position adjusting thingies on the bottom and side. I'm not sure if I've ever seen that on any other images. Is that something other than an tag? Lump  

It is from Chiltons. I screensaved it. Then photoshopped, cropped the picture.  

Darrenmb said: ummm thats the crank sensor cam sensor is inside the distributor, basically in the place where the points used to be waaaayyy back in the olden days!!! Click to expand...

Very easy to change , pull off distributor cap . pull off rotor , remove a couple screws , unplug the wire connector lift and remove , those wires coming out of the side of the distributor is the wire connector , after you remove the engine cover it takes about 15-20 minutes to replace it ,,, if you do not have a scan tool to clear the codes , just disconnect the battery cable before you start , by the time to get it replaced the codes should be cleared .  

• ?            
• 445.9K posts
• 24.9K members

Top Contributors this Month

• Replacement Parts
• Camshaft Position

Image Unavailable

• To view this video download Flash Player

Engine Camshaft Position Sensor Compatible With GMC Safari 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 PC-541169

Purchase options and add-ons, about this item.

• 📦 Includes 1 (One) Engine Camshaft Position Sensor
• 👉 Fits list of vehicles in image gallery fitment chart
• ✅ Exceptional Quality and Performance: This OE replacement engine camshaft position sensor is designed to meet, if not exceed, the performance and quality standards of the original equipment installed on your vehicle. Experience the same high-level performance as your original parts with this engine camshaft position sensor.
• ✅ Direct Replacement, No Fuss: This OE replacement engine camshaft position sensor is meticulously designed for your specific vehicle
• ✅ Perfect Compatibility: Compatibility is key. Make sure to check our product specifications (in image gallery) to confirm that this OE replacement engine camshaft position sensor matches your vehicle

Product Description

When you need to replace your damaged or worn-out part your vehicle, this OE replacement part is an excellent option. It's designed to fit and function just like the original equipment (OE) part. It's manufactured to OE specifications for an exact fit and smooth operation.

Product information

Technical details, additional information, warranty & support, looking for specific info, customer reviews.

• 5 star 4 star 3 star 2 star 1 star 5 star 0% 0% 0% 0% 0% 0%
• 5 star 4 star 3 star 2 star 1 star 4 star 0% 0% 0% 0% 0% 0%
• 5 star 4 star 3 star 2 star 1 star 3 star 0% 0% 0% 0% 0% 0%
• 5 star 4 star 3 star 2 star 1 star 2 star 0% 0% 0% 0% 0% 0%
• 5 star 4 star 3 star 2 star 1 star 1 star 0% 0% 0% 0% 0% 0%

Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.

To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.

No customer reviews

• Amazon Newsletter
• About Amazon
• Accessibility
• Sustainability
• Press Center
• Investor Relations
• Amazon Devices
• Amazon Science
• Sell on Amazon
• Sell apps on Amazon
• Supply to Amazon
• Protect & Build Your Brand
• Become an Affiliate
• Become a Delivery Driver
• Start a Package Delivery Business
• Advertise Your Products
• Self-Publish with Us
• Become an Amazon Hub Partner
• › See More Ways to Make Money
• Amazon Visa
• Amazon Store Card
• Amazon Secured Card
• Amazon Business Card
• Shop with Points
• Credit Card Marketplace
• Reload Your Balance
• Amazon Currency Converter
• Your Account
• Your Orders
• Shipping Rates & Policies
• Amazon Prime
• Returns & Replacements
• Manage Your Content and Devices
• Recalls and Product Safety Alerts
• Registry & Gift List
• Conditions of Use
• Privacy Notice
• Consumer Health Data Privacy Disclosure
• Your Ads Privacy Choices

CarParts.com will be back soon!

We apologize for the inconvenience. The CP Team is working on some upgrades to improve our service. Thank you for using CarParts.com!

You can call us at

1-866-529-0412

Reference ID: 18.cf6d655f.1725830563.56c947c7

• 1-888-737-9766
• Buick Parts
• Cadillac Parts
• Chevrolet Parts
• Hummer Parts
• Oldsmobile Parts
• Pontiac Parts
• Saturn Parts
• GM Accessories
• Login/Register
• Track Order
• Help Center

Genuine 1998 GMC Safari Camshaft Position Sensor

Enter your vehicle info to find more parts and verify fitment.

• Select Vehicle by VIN
• Select Vehicle by Model

1 Camshaft Position Sensor found

1998 GMC Safari SENSOR ASM,CM/SHF POSN (KIT)

• Replaces : 10490645, 10485432
• VAN SAFARI | 6 Cyl 4.3L

Related 1998 GMC Safari Parts

Alternate Year Models

FREE SHIPPING on most orders of $35+ & FREE PICKUP IN STORE

1998 GMC Sonoma

1998 GMC Sonoma - Camshaft Position Sensor

• Delphi Automotive
• Dorman OE Solutions
• MasterPro Ignition
• Standard Ignition
• Standard Ignition Blue Streak

Terminal Type

Terminal gender.

• Female, Male

MasterPro Ignition 3 Terminal Camshaft Position Sensor

Standard ignition 3 terminal camshaft sensor; ignition hall effect switch, standard ignition 3 terminal camshaft position sensor, acdelco camshaft position sensor, multiple applications, dorman oe solutions 3 terminal camshaft position sensor - new, what is a camshaft position sensor.

The camshaft position sensor in your vehicle detects the camshaft's relative position using an electromagnet and a geared wheel, and communicates this information to the engine control module (ECM). This helps the engine computer determine which cylinder is firing in order to sync your injectors, set ignition timing, and maintain the coil firing sequence. The camshaft position sensor is a Hall Effect sensor, meaning that its internal electromagnet detects the movement of the geared wheel as it spins, and this magnet can begin to wear out or weaken over time. This may lead to inaccurate or inconsistent readings, or your camshaft position sensor may fail to send any readings to the ECM. Camshaft position sensor problems can affect a vehicle's engine timing or its ability to start at all. Rough idle, stalling, reduced power or slow acceleration, reduced gas mileage, longer start times, and a complete failure to start could all point to a failing cam sensor. A bad camshaft position sensor may also trigger the Check Engine light to alert you to a problem. If a camshaft position sensor fails completely, it may stop sending any signal at all to your engine computer, and this may cause the vehicle to stop running and fail to start again. This can be dangerous if it happens while driving, leaving you stranded, so it's best to address signs of a camshaft position failure as soon as possible. O'Reilly Auto Parts carries replacement camshaft position sensors and crankshaft sensors for most vehicles and even offers free Check Engine light testing to help you start your diagnosis and complete your repair.

• Скидки дня
• Справка и помощь
• Адрес доставки Идет загрузка... Ошибка: повторите попытку ОК
• Продажи
• Список отслеживания Развернуть список отслеживаемых товаров Идет загрузка... Войдите в систему , чтобы просмотреть свои сведения о пользователе
• Краткий обзор
• Недавно просмотренные
• Ставки/предложения
• Список отслеживания
• История покупок
• Купить опять
• Объявления о товарах
• Сохраненные запросы поиска
• Сохраненные продавцы
• Сообщения
• Развернуть корзину Идет загрузка... Произошла ошибка. Чтобы узнать подробнее, посмотрите корзину.

Oops! Looks like we're having trouble connecting to our server.

Refresh your browser window to try again.

Related Searches

• oem camshaft position sensor
• camshaft position sensor
• camshaft position sensor bank 2
• cam position sensor
• intake camshaft position sensor
• camshaft sensor
• cam shaft sensor
• ls3 cam sensor
• cam motion camshaft
• ls camshaft
• oem crankshaft position sensor
• ls cam bearing
• cam bearing tool ls
• camshaft corvette

The climate of Samara ( Russia ) Samara is located in the south-western part of Russia where the Samara River and the Volga flow into each other. Samara is situated in the European part of Russia and is the capital of the Samara oblast (administrative division). A large part of the 20th century the city was named Kuybysjev. Samara is a large industrial city specialized in machine building and metal working. The famous R-7 missiles used to be built here; one of them can still be found in the Soyuz Space museum. Samara has a dry continental climate with cold and long winters and short but pleasant summers. Winters can be very cold in Samara; temperatures below -20 degrees Celsius are not uncommon. The coldest temperature on record is -43 degrees Celsius. Summers are pleasant with temperatures of 25+ degrees Celsius. Samara gets about 550 millimeters of rain per year and has a average annual humidity figure of 72%.

Disclaimer The information at this site was carefully composed from climate data collected by meteorological services, meteorological offices, climate experts and other sources. “More climate info” is based on statistics, climate data and personal experience. No rights can be derived from this site. Weather has no memory and gives no guaranties. Nothing is as changeable and unpredictable as the weather. The authors of this site feel in no way responsible for any damages caused by misinterpretation or other circumstances that may influence your holiday or trip to a certain destination. We provide information, it’s up to the reader to use it to it’s benefit.  

Lysanderhöhe (Am Trakt Mennonite Settlement, Samara Oblast, Russia)

Lysanderhöhe was a village of the Am Trakt Mennonite settlement in the province of Samara , Russia , founded in 1864, consisting in 1897 of 22 farms, with a population of 119. A part of the population joined the trek to Turkestan in 1891, while others immigrated to America. In 1914 the population was 146. Franz Bartsch , the author of Unser Auszug nach Mittelasien, was the teacher of the village school. After the Revolution of 1917 the cultural and economic level of the village began to decline. Some of the inhabitants went to Canada and others were exiled. Little is known about the fate of those who remained and the later status of the village.

Bibliography

Dyck, Johannes J. based on a text by W.E. Surukin. Am Trakt: A Mennonite Settlement in the Central Volga Region . Translated by Hermina Joldersma and Peter J.Dyck. Winnipeg: CMBC Publications, 1995.

Hege, Christian and Christian Neff. Mennonitisches Lexikon , 4 vols. Frankfurt & Weierhof: Hege; Karlsruhe: Schneider, 1913-1967: v. II, 709.

Surukin, W. E. und Johannes J. Dyck. Am Trakt, Eine Mennonitische Kolonie im Mittleren Wolgagebiet .North Kildonan, Man., 1948.

Cite This Article

Krahn, Cornelius. "Lysanderhöhe (Am Trakt Mennonite Settlement, Samara Oblast, Russia)." Global Anabaptist Mennonite Encyclopedia Online . 1957. Web. 8 Sep 2024. https://gameo.org/index.php?title=Lysanderh%C3%B6he_(Am_Trakt_Mennonite_Settlement,_Samara_Oblast,_Russia)&oldid=144294 .

Krahn, Cornelius. (1957). Lysanderhöhe (Am Trakt Mennonite Settlement, Samara Oblast, Russia). Global Anabaptist Mennonite Encyclopedia Online . Retrieved 8 September 2024, from https://gameo.org/index.php?title=Lysanderh%C3%B6he_(Am_Trakt_Mennonite_Settlement,_Samara_Oblast,_Russia)&oldid=144294 .

©1996-2024 by the Global Anabaptist Mennonite Encyclopedia Online. All rights reserved.

Navigation menu