trip switch keep tripping randomly help

• svg]:fill-accent-900 [&>svg]:stroke-accent-900"> 826K
• svg]:fill-accent-900 [&>svg]:stroke-accent-900"> 622K
• svg]:fill-accent-900 [&>svg]:stroke-accent-900"> 246K
• svg]:fill-accent-900 [&>svg]:stroke-accent-900"> 45K

Why Is My Circuit Breaker Tripping? 4 Potential Problems and Solutions

By Glenda Taylor , Bob Vila , Evelyn Auer

Updated on Dec 15, 2023 4:16 AM EST

6 minute read

We may earn revenue from the products available on this page and participate in affiliate programs. Learn More ›

What You Need to Know

• A tripping circuit breaker could be a sign of an overloaded circuit, a short circuit, a ground fault, or a worn-out breaker.
• Homeowners will want to hire an electrician to determine the cause of the frequently tripping circuit breaker.
• Electricians may recommend replacing the circuit breaker, installing GFCI outlets, or rewiring part or all of the home.

Q: Every few hours—sometimes minutes!—my living room and one side of my kitchen lose electrical power. I’ll check the breaker panel and, sure enough, a circuit breaker has tripped…again. Should I call an electrician, or is there a simple DIY fix I can try first?

A: While it’s frustrating when a circuit breaker keeps tripping, they are important safety mechanisms. Designed to shut off the electrical current when something goes wrong, circuit breakers are one of the best ways of protecting a home from an electrical fire. “When a circuit breaker trips, typically it is because we use too much electricity, which causes it to overload and turn off,” says Christopher Haas, expert electrician and owner of Haas & Sons Electric in Millersville, Maryland. For those who need an electrical panels 101 refresher course or aren’t sure how to reset circuit breakers, each breaker has an on/off switch and controls a separate electrical circuit in the home. When a breaker trips, its switch automatically flips “off,” and it must be manually turned back on to restore electricity to the circuit. For those wondering, “Is it dangerous if a circuit breaker keeps tripping?” the answer is that it can be, depending on the source of the problem. An electrician can ultimately deal with the root issue, but a little sleuthing will reveal whether it’s something that’s easily remedied.

In many cases, the cause of a circuit breaking tripping is an overloaded circuit.

A circuit overloads when more electrical current is being drawn through the wires than they can handle, tripping the circuit breaker. If this happens, there may be a few additional signs:

• Buzzing noises coming from outlets
• Devices charging slowly
• Electrical outlets not working
• Flickering lights
• Scorch marks on outlets and light switches

If a circuit breaker keeps tripping in one room, homeowners can test for circuit overload by turning off all the switches in the affected area and unplugging all appliances and devices. After the breaker is flipped back on, the devices can be turned back on one at a time, with homeowners waiting a few minutes in between to see if the circuit remains on. If the breaker trips before all the appliances are turned on, the experiment can be repeated, this time turning them on in a different order. It may be necessary to do this several times to find out how many appliances can be operated at once before the circuit overloads.

“As a short-term solution, you can unplug unnecessary appliances to prevent tripping circuit breakers. You may still get some trips, but you can limit them by unplugging devices that you don’t need to use,” advises Dan Mock, vice president of operations at Mister Sparky , an electrical company with 90 locations in the U.S. The best long-term solution, however, is to pay an electrician for the cost to rewire the house and add additional circuits. The cost to replace an electrical panel is about $1,274 on average.

Other times, the issue may be caused by a short circuit.

A “short” circuit means that two wires that should not be coming into contact are inadvertently touching, triggering a sudden surge of electricity through the wires. A short can occur in an outlet, a switch, or within an appliance if wires are loose or have been chewed through by mice or pets. Some signs of a short circuit include:

• Popping sounds
• Discolored outlets or switches
• Burning smells

Testing to see if an appliance has a short is similar to testing for an overloaded circuit. When an appliance that has a short in its wiring is turned on, it will immediately trip the circuit. Homeowners can also try plugging it into an outlet in a different room. If the breaker for that room trips, there’s a short in the appliance (if it’s unclear what breaker goes to what room, the breaker can be identified with one of the best circuit breaker finders ). Electrical shorts can be a major fire hazard, so it’s a good idea to call a licensed electrician for this circuit breaker repair. It’s wise to stop using the outlet or appliance until a pro takes care of the problem.

Another potential cause of a circuit breaker tripping is a ground fault.

A ground fault occurs when the electricity running through a home’s wiring diverts from the wiring loop and travels to the ground, usually due to faulty wiring or water infiltration in an outlet or switch box. Water is a conductor, which is why walking through puddles is often listed as something not to do in a power outage in case of downed power lines. Once water makes contact with wires, electricity can jump from the wiring loop and follow the water trail. This creates a surge in electricity leading to a tripped circuit breaker. If a person comes in contact with the electricity that is on its way to the ground, this can result in electrocution. Homeowners may notice a few signs of a ground fault, including:

• Tripped GFCI (ground fault circuit interrupter) outlets;
• A burning smell coming from an outlet; and
• Lights flickering.

Newer electrical breakers have features designed to protect against the danger of ground faults. According to Haas, “Ground fault breakers sense electricity going to earth as opposed to going through the wires of the circuit. You’ll find [these] for bathrooms, kitchens, garages, exteriors, and basements.” GFCI outlets are another safety feature that shut off the electric current within a fraction of a second of sensing a ground fault.

If a ground fault is the problem, the cause of the errant water must be discovered and repaired, and any damaged wiring must also be replaced. It’s also a good idea to install GFCI outlets in rooms where water is commonly used. A GFCI outlet costs $210 on average.

Sometimes a bad or worn-out circuit breaker can be the culprit.

In some cases, the circuit breaker itself may be faulty. Breakers that are old, damaged, or were installed incorrectly may trip frequently for no apparent reason. Alternatively, faulty breakers may not trip when they are supposed to, leaving the home at risk of electrical fire. Some signs of a bad circuit breaker include:

• The circuit breaker getting hot and tripping frequently;
• The circuit breaker won’t reset;
• It has been over 10 years since the breaker was last serviced; and
• The breaker has scorch marks.

An important electrical safety tip to keep in mind is that resetting a breaker over and over again can cause what is called an arc flash, which is a small electrical explosion that can be deadly. If resetting the breaker once does not remedy the issue, it’s a good idea for the homeowner to hire an electrician near them who knows how to replace a circuit breaker safely. Mock warns, “Don’t take any chances with circuit breakers. Instead, call a licensed electrician who knows the safe ways to replace breaker boxes, upgrade circuits, and diagnose potential electrical problems in your home.” Wiring a breaker box is a job to leave to an experienced electrician.

A professional electrician can help determine the specific cause of a frequently tripping circuit breaker.

Most circuit breaker problems—aside from those explained in the sections above—will need to be inspected and addressed by a licensed electrician. According to the Electrical Safety Foundation International (ESFI) , each year “thousands of people in the United States are critically injured and electrocuted as a result of electrical fires, accidents, [or] electrocution in their own homes.” While homeowners may be tempted to save on electrician costs by attempting circuit breaker replacement or repair themselves, electrical work is not suitable for casual DIYers. “Yes, you have to pay, but you can save many hours of head-scratching by hiring an electrician. Electricians will also have all the right tools for diagnosing and repairing the circuit,” Haas adds. “Lastly, they will come with a warranty/guarantee should something arise, and they will typically return at no additional cost.”

The 5 Handiest Items for a DIYer’s Home, Garage, and Beyond The 5 Handiest Items for a DIYer’s Home, Garage, and Beyond

By Chase Brush

Your Biggest Questions About Heat Pumps, Answered Your Biggest Questions About Heat Pumps, Answered

By Tony Carrick

855-695-1195

Schedule Service

Top 5 Reasons Your Circuit Breaker Keeps Tripping: Effective Solutions to Common Electrical Issues

A circuit breaker that repeatedly trips is more than just an annoying inconvenience; it’s a sign of an issue within your electrical system that requires attention. The circuit breaker’s primary role is to safeguard your home from electrical hazards, so when it trips, it’s doing its job to prevent potential electrical fires or other dangers. Several factors can cause your breaker to trip, including circuit overload, short circuits, ground faults, or a malfunctioning breaker itself. Understanding why your circuit breaker trips and how to address the problem not only can save you from persistent trouble but also help ensure the safety of your home.

Troubleshooting the reasons behind a tripping circuit breaker is a critical skill for homeowners. It involves interpreting the signs your electrical system presents and knowing how to reset the breaker correctly. While some issues, like resetting a tripped breaker or reducing an overloaded circuit, are within the realm of DIY fixes, others, such as dealing with short circuits or faulty wiring, require the expertise of a licensed electrician. It’s essential to know when to tackle the problem yourself and when to call professionals for help, ensuring that you maintain a safe and functional electrical system.

Key Takeaways

• Identifying the cause of a tripping circuit breaker is crucial for safety and system integrity.
• Resetting a tripped breaker involves following proper steps to ensure electrical safety.
• Knowing when to consult a professional electrician is important for troubleshooting complex circuit breaker issues.

Understanding Circuit Breakers and Their Function

In this section, you’ll learn precisely what a circuit breaker is and how it functions as a safety mechanism to prevent electrical fires.

What is a Circuit Breaker?

A circuit breaker is an automatic electrical switch designed to protect an electrical circuit from damage caused by excess current resulting from an overload or short circuit. It works by interrupting the flow of electricity upon detecting a fault condition. Unlike a fuse, which operates once and then must be replaced, a circuit breaker can be reset to resume normal operation.

How Circuit Breakers Prevent Electrical Fires

Circuit breakers play a crucial role in maintaining your safety by mitigating fire hazards. If an electrical overload or short occurs, a breaker will “trip”, effectively cutting off power to the affected circuit. This interruption in electrical flow stops excessive current that can cause overheating, which if left unchecked, could result in electrical fires. By acting as a safeguard, circuit breakers help to preserve both your electrical system and your physical safety

Reasons for Circuit Breaker Tripping

When your circuit breaker trips, it’s often due to preventable electrical issues within your home. Understanding why this happens is the first step in addressing the problem.

1. Overloaded Circuits

Overload occurs when you demand more electrical power from a circuit than it can handle. Common signs of an overloaded circuit include appliances that seem underpowered or lights that dim when you use other appliances. To rectify this, try:

• Unplugging unnecessary devices to reduce the electrical load.
• Spreading high-energy appliances across different circuits.

2. Short Circuits

A short circuit is a more serious issue marked by two wires touching that should not—an occurrence potentially hazardous and a common reason for tripping . This can result from a variety of issues including damaged wires or faulty appliances. If you notice a burning smell or scorched outlets, the next steps include:

• Powering off the circuit.
• Inspecting your appliances and wiring for damage.
• Seeking professional help if you’re not experienced with electrical work.

3. Ground Faults

  Ground faults are similar to short circuits but involve a hot wire touching a ground wire or metal box. They often occur in areas at risk for moisture intrusion, such as kitchens or bathrooms. Manage ground faults by:

• Testing GFCI (Ground Fault Circuit Interrupter) outlets regularly.
• Keeping appliances away from water sources.
• Consult with an electrician to ensure proper grounding of all outlets.

4. Power Surges

External power surges due to lightning or changes in the power grid and internal surges, when high-power appliances turn on and off, can trip breakers.

5. High-Power Appliances

High-power appliances like microwaves, hair dryers, and air conditioners can trip breakers, particularly if other devices are used on the same circuit simultaneously.

How to Properly Reset a Tripped Breaker

If you’re faced with a tripped breaker, it’s crucial to approach the reset process with a focus on electrical safety to avoid hazards. Ensuring you follow the proper steps can safeguard both your well-being and your home’s electrical system.

Assessing the Safety Before Resetting

Firstly , verify that there is no apparent danger in your surroundings. If you notice any unusual signs, such as scorch marks on outlets or a burning smell, do not attempt to reset the breaker; instead, consult a professional electrician. Additionally, ensure that the area around your electrical panel is dry to prevent the risk of electric shock.

Step-by-Step Reset Process

follow these steps to reset your tripped breaker:

• Identify the Tripped Breaker : Look for the breaker that is positioned in the middle, indicating that it has tripped.
• Unplug Devices : Before resetting, unplug all devices connected to the tripped circuit to prevent further overload when the power is restored.
• Reset the Breaker : Flip the tripped breaker firmly to the ‘Off’ position and then to the ‘On’ position.

By taking these measures, you can reset your breaker safely and effectively. Remember to always prioritize safety when dealing with electrical issues. If the breaker trips again after you have reset it, or if you are unsure at any stage, it is essential to contact a qualified electrician.

Preventive Measures and When to Call a Professional

To ensure the safety and reliability of your home’s electrical system, adopt a proactive approach. Regular maintenance can prevent circuit breaker issues while recognizing when professional intervention is necessary can save you from more extensive problems.

Regular Maintenance and Inspections

Conducting regular maintenance on your electrical system is pivotal to preventing unexpected circuit disruptions. At least once a year, inspect your electrical wiring, looking for signs of wear and tear. Test safety devices like GFCI outlets periodically to confirm they’re functioning properly.

Upgrading Your Electrical System

If your home is older, it may be time to consider upgrading your electrical system. This could include replacing old wiring that can’t handle modern electrical loads or adding additional circuits. Upgrades provide not only enhanced safety but also improved functionality for your everyday power needs.

Hiring a Licensed Electrician

In certain scenarios, it’s crucial to entrust the job to a professional electrician like Kaminskiy Care and Repair. Tasks like diagnosing frequent breaker trips, repairing faulty wiring, or upgrading your electrical panel should be handled by a qualified electrician to ensure the work adheres to code and maintains your safety.

Understanding why your circuit breaker keeps tripping is essential for maintaining a safe and functional electrical system in your home. From overloaded circuits to faulty appliances, each cause has a specific solution. Regular checks and maintenance can help you avoid these issues and the inconveniences they bring.

For expert advice and professional service, contact Kaminsky Care and Repair. Our skilled electricians can help you diagnose and fix any electrical issues, ensuring your home remains safe and your power is uninterrupted. Trust us to provide reliable solutions tailored to your needs. Remember, dealing with electrical systems can be hazardous. Always consider professional help for complex issues to ensure safety and efficacy.

Frequently Asked Questions

When addressing issues with your circuit breaker, understanding the potential causes of tripping can be crucial in finding the right solution.

Even with no appliances connected, your circuit breaker may trip due to wiring issues such as a ground fault or damage to the insulation of the wires within the affected circuit.

A circuit breaker that frequently trips could signify a serious electrical problem, such as a potential fire hazard due to overloaded circuits or faulty wiring.

If your breaker trips immediately after resetting, this could indicate a direct short circuit or a ground fault in one of the connected appliances or within the circuit wiring itself.

Check for overload by unplugging all devices and then reconnecting them one at a time. Also, inspect outlets and switches for signs of damage, scorch marks, or loose connections.

Yes, a circuit breaker can trip after a period due to a slow-building overload or a thermal trip caused by a heating issue within the breaker itself.

Begin by documenting when the trips occur to identify any patterns. Then, systematically test the devices and outlets on the circuit, looking for worn cords or plugs, and inspect the breaker itself for signs of damage or wear.

Find a local trusted trader

Search by trader name

What To Do If: Your Fuse Keeps Tripping

Electricity is one of the basic essentials in our homes, coming before almost anything else. If a fuse goes, it can be frustrating, but it helps to know what to do and when to call an electrician.

Causes of tripped or blown fuses

Finding out the cause of a tripped or blown fuse usually involves a process of elimination and a little patience. Most common causes are:

• Too many appliances plugged in
• A faulty appliance
• An appliance that is not maintained or is used inappropriately (e.g. overfilled kettle)
• Faulty immersion heaters
• Blown lightbulb
• Worn cooker rings.

If a fuse goes…

If a fuse goes, head straight to your fuse box, which is near your meter. Hopefully, you will know where it is and how to access it already. Your fuse box will have either fuses or trip switches. If a fuse “blows” then you will have to replace it in order to regain power. Trip switches are a more modern alternative to fuses. Rather than the fuse physically breaking, the switch is tripped and the power circuit goes from “on” to “off”.

Reset the trip switch

If a trip switch has gone, you should easily be able to see which one is the problem as the lever will be in the down position (usually showing “off” in red). Simply push the switch back up, to show “on” in green. If the switch flips down immediately, that is a sign that you have a faulty appliance plugged in somewhere. This is where the fun starts!

Finding a faulty appliance

It is most likely that only one circuit has tripped.

• Make a note of the appliances that aren’t working and unplug each one. If you have an immersion heater, switch it off.
• Once everything is unplugged, flip the trip switch to ON. It should stay on this time.
• Now go around the house and plug in each item that you have unplugged.
• Keep plugging appliances in until the fuse trips again; you have identified your culprit!
• Keep the faulty appliance unplugged (you can switch the trip back on now) and take it to a nearby electrical specialist for repair.

If the faulty item has a plug, it is worth changing the fuse in the plug before you take the appliance to be repaired. Replacing a fuse is not dissimilar to changing a battery. Unscrew the cover and look at the fuse in the plug already, or check the rating on the plug to find out what fuse you need. Once you know what fuse to use, it is a case of removing the old fuse, and popping a new one in.

While it is fine to attempt to do a range of home repairs yourself, when it comes to electrical faults, it is best left to the professionals. If you need to find an electrician, check out Trust A Trader’s directory of local trusted electricians . For more tips and advice, follow us on Facebook or Twitter .

Was this useful?

• Share on Facebook
• Share on Twitter

An electrician’s guide on how to fix a tripped fuse

Any kind of major electrical fault around the house will need to be repaired by a professional electrician. However, that said, there are a few everyday electrical tasks that aren’t complicated, or dangerous, which you could attempt yourself. The most important thing to remember is to switch off and unplug whatever it is you need to work on so there’s no danger of a live current.

The first thing to do is find your main fuse box (these days called a consumer unit), which will be in the same place as your electricity meter. They’re often in the main hallway of a house, in a purpose-built cupboard. This is where the electricity in your house is controlled from, and it’s important that you know where to go and what to do if you need to turn off the mains electricity. It’s also helpful to remember where you left a torch too!

In the case of loss of electric light or power

Your fuse box, or consumer unit, will either have fuses or trip switches. Modern electric circuits are fitted with a circuit breaker fuse system; if a fault develops, a switch is tripped and the circuit is broken. Older ones have fuse holders and when a fuse is blown it must be replaced or rewired.

If you experience problems with an old-fashioned fuse box, it might be sensible to install a replacement which conforms to current regulations for ease, safety and peace of mind. If you need assistance with any kind of electrical installation we would recommend calling out a qualified electrician .

Setting a trip switch Open the cover on the consumer unit to see which switches have tripped to the OFF position. Put them back to the ON position. If tripping occurs again, it is probably being caused by a faulty appliance. You need to identify which circuit is affected and which appliance on that circuit is causing the problem.

Which appliance is faulty?

Go around the house noting which set of lights or sockets are not working. Unplug all appliances on that problem circuit and switch off any immersion heaters (if you have one). Switch the tripped switch to the ON position and plug in the appliances one by one until the trip goes again. Leave that appliance unplugged, and have it repaired by a qualified electrician.

What causes it to trip or blow a fuse?

• An overloaded circuit
• Too many appliances being used at the same time
• A faulty or misused appliance
• Overfilled kettles
• Unclean toasters
• Cooker rings worn out or cracked
• Faulty immersion heaters
• Faulty connections on leads to appliances e.g. televisions or stereos etc.
• Light bulbs blowing

Most plugs will have a fuse inside them. If the appliance suddenly stops working, it is worth replacing the fuse inside the plug before calling an electrician.

To find out the correct type of fuse to fit in the plug, check the rating plate on the appliance. Do not overload plug sockets by using multiple plug adaptors.

Replacing the plug on an appliance is fairly straightforward, and is well worth doing before you declare your electrical appliance broken.

• Do not tamper with the electricity company’s fuse and seals
• Do not take any action unless you are confident you can do it safely and legally

Was this article helpful?

Think we could improve this article? Please let us know

Leave a Reply

Your email address will not be published. Required fields are marked *

Book a qualified electrician

Our electricians are on call for domestic and commercial work.

• Fixed-price quotes available
• Trade accredited experts
• Half-hour rates from £47.50 + VAT
• 5% off labour when you book online

More about our electrical services

Our electricians can be booked for a wide range of tasks. Read more about the range of services we provide here: –

• Electrical safety tests (EICR) ; all our electricians are qualified to inspect and test any type of electrical installations and issue the appropriate safety certificates
• Electrical repairs and fault finding ; we can usually schedule an electrician to visit the same day a booking is made and begin carrying out the electrical repairs you need straightaway
• Electrical installations and rewiring ; our NICEIC enrolment allows us to self-certify our electrical installation work so you can be sure it complies with UK Building Regulations
• PAT – Portable Appliance Testing ; regular testing is generally regarded as the best way of showing that maintenance and safety checks have been carried out correctly
• Emergency electricians on call ; our emergency response team is on call for large scale incident response as well as single property faults

Other articles you might like

The 10 most common roofing problems.

Without a regular inspection, your roof could suffer from a wide range of unseen and undiagnosed issues. In this article, we outline the ten most common faults that our experts find during roofing survey inspections... Common roofing problems

What is an F22 fault code on a Vaillant boiler?

Modern boilers display error codes when there's a fault. The F22 code is the most searched for online, which appears on Vaillant boilers. Learn what this code means and what you can do to resolve the problem... The code for low boiler pressure

10% off our hourly rates when you book online .

We use cookies to ensure you get the best experience on our website and for the purposes illustrated in our Cookie Policy

Okay, got it

(912) 602-3068 | Need Power? Call Clocktower!

(912) 602-3068

How to Fix a Tripped Circuit Breaker That Won’t Reset

• July 5, 2024
• Electrical Tips

Have you ever had a circuit breaker trip and found that it won’t reset? It’s a common problem, and one that can be frustrating when you’re not sure what to do.

The most common reasons for a circuit breakers that won’t reset are:

• Damaged breakers
• Electrical shorts
• Loose wiring
• Damaged insulation

As the top reviewed residential and commercial electrician in our area , we’ll walk you through how to check for each of these common reasons, and discuss how to fix them.

Why circuit breakers trip

A circuit breaker is a safety device in your home designed to stop the flow of electricity if there’s an overload, which can help prevent fires. When the current flowing through the circuit breaker becomes too much for it to handle, it “trips” and shuts off the power to prevent a fire from starting.

Most of the time, resetting a tripped circuit breaker is a simple matter of flipping the switch back to the “on” position. However, sometimes the breaker won’t reset no matter how many times you flip it.

First, try to reset the tripped circuit breaker

First, we should perform a basic test to make sure the breaker is actually malfunctioning. If you haven’t already tried manually resetting the circuit breaker, this is the place to start.

Locate your circuit breaker box and open the cover. Once you’ve located the tripped breaker, flip it to the “Off” position. Then, flip it back to the “On” position. You should hear a click as the breaker resets. If the breaker trips again, or simply won’t reset, there may be a problem with your wiring.

How to fix a tripping circuit breaker

Check to see if the circuit breaker is damaged.

If the circuit breaker trips and won’t reset, the first thing you should do is check to see if the switch is damaged. Circuit breakers are designed to trip when they become overloaded, which means they’re also designed to be flipped back on when the overload is resolved. However, if the switch itself is damaged or the electrical panel is outdated , it may not reset properly.

To check for damage, first make sure that there’s no power going to the breaker box by flipping all the switches to the “off” position. Then open up the panel and visually inspect the faulty breaker for any signs of burned or blackened areas. If you see any charring or burning around the switch, it’s likely time to replace it.

In some cases, you may be able to reset a damaged breaker by gently bending the switch back into place. However, this is only a temporary fix and the breaker will eventually need to be replaced.

We recommend that if you see any damage, it’s best to replace the entire circuit breaker rather than just the switch.

Check to see if there’s an electrical short

Another reason why your circuit breaker won’t reset after tripping is because there’s an electrical short somewhere in your home. An electrical short occurs when there’s too much current flowing through a wire, causing it to overheat and potentially start a fire.

To figure out if there’s an electrical short, the first thing you should do is turn off all of the switches in your breaker box. Once everything is off, go around your home and look for any signs of an electrical fire, such as burning smells or smoke. If you see or smell anything suspicious, call a licensed electrician right away.

If you don’t see any signs of a fire, the next step is to identify which circuit is causing the problem. Start by flipping on one switch at a time and seeing if the breaker trips. If it does, leave that switch off and move on to the next one. Repeat this process until you’ve found the problem circuit.

Once you’ve identified the problem circuit, the next step is to figure out where the electrical short is located. The easiest way to do this is to start at the breaker box and work your way down the circuit until you find the problem.

If you’ve followed these steps and you believe there may be an electrical short, it’s important to call an electrician right away. They’ll be able to locate the source of the problem and fix it before it causes any further damage.

Check for loose wiring

Another common reason for a circuit breaker to trip is because of loose wiring. Over time, wires can loosen and become frayed, which can cause them to short circuit.

The best way to check for loose wiring is to listen to your devices and appliances for the sound of buzzing or crackling. One common culprit is buzzing light switches or outlets. If you don’t find a faulty appliance, note that this can also be true around the breaker.

If you hear these noises and suspect that your circuit breaker is tripping because of loose wiring, the best thing to do is call an electrician as soon as possible. Trying to fix the problem yourself could result in injury or even death.

An electrician will be able to quickly diagnose the problem and make the necessary repairs. In most cases, they’ll also be able to prevent the problem from happening again in the future.

Look for signs of corrosion

Another common reason for a circuit breaker to trip is corrosion. This is especially true if you notice any moisture or wetness in the electrical panel . Corrosion can cause the metal parts of the breaker to break down, which in turn can cause a short circuit.

Corrosion usually appears in the form of a white, chalky substance building up around screw terminals. Look for signs of corrosion, rust, or moisture around the circuit breaker.

If you suspect that corrosion is the culprit, call an electrician to have a look at the problem. Trying to clean or repair the corrosion yourself could result in serious injury.

Check for damaged insulation

Sometimes circuit breakers will have insulation around them to stop cold air from entering through the box itself. Damaged insulation is another common cause of tripped circuit breakers. If you have insulation around the box, inspect it to see if it looks damaged.

If the insulation around your electrical wiring is damaged, it could cause a short circuit. Once again, if you suspect that this is the problem, call an electrician rather than trying to repair the problem yourself.

Is it dangerous if a circuit breaker keeps tripping?

We are often asked if tripping circuit breakers are dangerous. If your circuit breaker keeps tripping, it could be a sign of an electrical problem in your home, up to and including serious fire risks. While it’s not necessarily dangerous if your circuit breaker trips occasionally, if it happens frequently, it should be fixed right away.

If your circuit breaker trips and won’t reset, don’t panic! Many times the problem is something minor that you can easily fix yourself. However, if you’re unsure of what to do or think the problem may be something more serious, always err on the side of caution and call an electrician . Trying to fix the problem yourself could result in serious injury or even death.

Resetting a tripped circuit breaker is a relatively simple process that most people can do on their own. However, if the breaker trips repeatedly or if you have any questions about your electrical system, it’s always best to contact a professional electrician for assistance.

If you have any questions about resetting your circuit breaker or if you need assistance from a professional, don’t hesitate to contact us . We’re here to help!

Latest Articles

Why Your Light Bulbs Keep Burning Out, and What to Do About It

High Electric Bill: Causes, prevention, and fixes

Why Would An Outlet Stop Working? Top 7 reasons, and their solutions

Average Electrician Cost to Install an EV Charger

Light Switch Buzzing: Causes, Dangers, and Fixes

How Many Things Can I Plug Into One Outlet Safely?

Copyright © 2023 Clocktower Electric, LLC. All rights reserved. St. Simon’s Island, GA 31522

Contact Us | Privacy Policy | Site Map

1335 Martin Luther King Jr Ave

Dunedin, fl 34698, (727) 648-6101.

1335 Martin Luther King Jr Ave, Dunedin, FL 34698

CALL US:   (727) 648-6101

5 Reasons Your Circuit Breaker Keeps Tripping and What You Can Do About It

Keep losing power, and aren't sure why here are five of the most common reasons why a circuit breaker keeps tripping, and what you can do to fix the problem..

1. Ground Fault

2. short circuit, 3. circuit overload, 4. arc fault, 5. damaged breakers, circuit breaker keeps tripping.

Newer Post >

Buell Electric's Blog

Shedding Light on Your Home: Finding the Right Electrician in Tampa

How Electricians Keep Up with Changing Technology in the Industry

The Importance of Regular Electrical Maintenance For Your Business

Marine Electrical Standards and Regulations You Need to Know

The Benefits of Installing a Smart Home System

Understanding the Different Types of Electrical Wiring in Your Home

How to Prepare Your Home for an Electrical Emergency

5 Reasons Your Ceiling Fan Installation Should be Left to the Pros

5 Tips for Hiring Residential Electrical Services

8 Common Outdoor Lighting Mistakes and How to Avoid Them

[email protected]

Mon-fri 9:00 am - 5:00 pm sat-sun 10:00 am - 5:00 pm privacy page, connect with us:.

Mon-Fri 9:00 AM - 5:00 PM Sat-Sun 10:00 AM - 5:00 PM

All Rights Reserved | Buell Electric, Inc.

How to Fix a Circuit Breaker That Keeps Tripping: A Comprehensive Guide

Understanding Circuit Breakers

• What is a Circuit Breaker?
• How Do Circuit Breakers Work?
• Causes of Tripped Circuit Breakers

Safety First: Precautions Before You Begin

• Importance of Safety Measures
• Necessary Tools and Equipment

Step-by-Step Guide to Fixing a Tripped Circuit Breaker

When to call a professional electrician.

• Signs of Complex Electrical Issues
• Professional Expertise and Assessment

Preventive Measures to Avoid Tripped Circuit Breakers

• Distributing Electrical Load
• Regular Circuit Maintenance
• How do I know if a circuit breaker has tripped?
• Can I simply keep resetting the circuit breaker?
• Why does my circuit breaker trip when I use certain appliances?
• Is it safe to replace a circuit breaker myself?
• What should I do if I smell burning near an outlet?

Embracing electric vehicles (EVs) is not just a trend; it's a pivotal step towards a sustainable future. But for this automotive revolution to truly flourish, w...

When it comes to the safety of electrical systems in your home, one often overlooked aspect is the presence of ungrounded outlets. While they may seem harmless,...

As Halloween approaches, it's time to conjure up the eerie and spine-chilling ambiance that this ghostly holiday demands. And what better way to set the stage f...

• PRO Courses Guides New Tech Help Pro Expert Videos About wikiHow Pro Upgrade Sign In
• EDIT Edit this Article
• EXPLORE Tech Help Pro About Us Random Article Quizzes Request a New Article Community Dashboard This Or That Game Happiness Hub Popular Categories Arts and Entertainment Artwork Books Movies Computers and Electronics Computers Phone Skills Technology Hacks Health Men's Health Mental Health Women's Health Relationships Dating Love Relationship Issues Hobbies and Crafts Crafts Drawing Games Education & Communication Communication Skills Personal Development Studying Personal Care and Style Fashion Hair Care Personal Hygiene Youth Personal Care School Stuff Dating All Categories Arts and Entertainment Finance and Business Home and Garden Relationship Quizzes Cars & Other Vehicles Food and Entertaining Personal Care and Style Sports and Fitness Computers and Electronics Health Pets and Animals Travel Education & Communication Hobbies and Crafts Philosophy and Religion Work World Family Life Holidays and Traditions Relationships Youth
• Browse Articles
• Learn Something New
• Quizzes Hot
• Happiness Hub
• This Or That Game
• Train Your Brain
• Explore More
• Support wikiHow
• About wikiHow
• Log in / Sign up
• Home and Garden
• Home Maintenance
• Electrical Maintenance
• Electrical and Electronic Circuits

Does Your Circuit Breaker Keep Tripping? Here’s How to Find the Cause

Last Updated: May 6, 2023 Fact Checked

Common Causes of Tripped Circuits

Finding overloaded circuits, finding short circuits, finding ground faults.

This article was co-authored by Jesse Kuhlman and by wikiHow staff writer, Johnathan Fuentes . Jesse Kuhlman is a Master Electrician and the Owner of Kuhlman Electric based in Massachusetts. Jesse specializes in all aspects of home and residential wiring, troubleshooting, generator installation, and WiFi thermostats. Jesse is also the author of four eBooks on home wiring including "Residential Electrical Troubleshooting" which covers basic electrical troubleshooting in residential homes. There are 8 references cited in this article, which can be found at the bottom of the page. This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources. This article has been viewed 23,346 times.

Picture this: you’re watching TV or browsing on your phone when, suddenly, half the lights in your home turn off. You check your circuit breaker and flip one of the switches back to “ON,” but an hour later it trips again…and again. Sound familiar? Having your circuit breaker trip over and over can be frustrating, but don’t sweat. In this article, we’ll explain the most common causes of a tripped circuit breaker. Keep reading to learn which causes might apply to your situation, when to try do-it-yourself fixes, and when it’s best to call an electrician.

Things You Should Know

• The most common causes of tripped circuit breakers are overloaded circuits, short circuits, and ground faults.
• Test for overloaded circuits by resetting your breaker and plugging in devices until it trips again. The device that caused the trip is overloading the circuit.
• Test for short circuits by resetting your breaker and plugging in items into different sockets. The device or socket that always trips the breaker likely has a short circuit.
• Have an electrician test for ground faults if you’ve already ruled out overloaded and short circuits. Ground faults are too dangerous to test for on your own.

• For example, if your bathroom and kitchen are part of the same circuit—that is, the plugs in your kitchen and bathroom are all connected to the same switch on your circuit breaker—then the breaker might trip if you run your microwave and hair dryer at the same time.

• Short circuits often happen when wires come loose or get damaged by corrosion or wear and tear, or even from an animal chewing through them. [3] X Research source
• Short circuits can occur in the wiring in your home or in individual devices. For instance, a refrigerator can have a short circuit due to a loose wire.

• Ground faults often happen due to water leaking into outlets or devices. They also occur when loose or corroded wires come into contact with ground wires, or when defective devices cause electricity to flow to a ground wire.

• If you have multiple devices sharing a single outlet in the area affected by the tripped breaker, it’s likely that that group of devices is causing the overload. [6] X Research source

• Wear safety goggles or stand to the side of a breaker when flipping a switch to “ON” in case of sparks.
• If the switches aren’t labeled, narrow down the affected area by flipping the switch to “ON” and checking which devices and lights turn on again.
• If multiple switches tripped at the same time, there might be an overloaded circuit in more than one area of your home, or you may have another issue such as a short circuit or ground fault.

• If none of the devices immediately trip the circuit breaker, it’s possible that your circuit isn’t getting overloaded right away. Leave the devices plugged in and turned on for a few minutes to see if the breaker trips again.
• If the breaker trips after several minutes, try the process again, but leave 1-2 less important devices unplugged. Eventually, you’ll find a combination of devices that doesn’t trip the circuit breaker.

• Leave your devices plugged in and on for a few hours. If the circuits are not overloaded, the circuit breaker shouldn’t trip.
• If the circuit breaker trips for the same part of your home again, plug additional devices into other outlets. You may need to try different combinations of plugs and outlets to see which combination doesn’t overload your circuits.
• If you try several combinations and the breaker continues to trip, it’s possible that you have a short circuit or ground fault somewhere in your home.

• If devices are plugged into surge protectors, unplug each device from the surge protector before unplugging the surge protector itself.

• If the circuit breaker trips whenever you plug something into a particular outlet, you probably have a short circuit in that outlet.
• If one particular device always trips the breaker, but other devices don’t, you probably have a short circuit in that particular device.

• If the device you want to test is too large to move—such as a kitchen refrigerator or washing machine—use a long extension cord to reach other outlets.

• If you find a short circuit in an individual device, check if your product is covered by a warranty. If it is covered, you might be able to get it fixed or replaced for free. [14] X Trustworthy Source Federal Trade Commission Website with up-to-date information for consumers from the Federal Trade Commisson Go to source

• Tell your electrician which outlet or area of your home is affected by the tripped circuit breaker. This will help them narrow down the exact problem.
• Avoid using sockets that appear water-logged or that show signs of water damage.

Expert Q&A

You Might Also Like

• ↑ https://nps.edu/documents/111291366/111353794/SafetyGram_Circuit_Breaker_Panels.pdf/eab72177-f7b7-4f6f-b7bc-f7efde96df4f?t=1423776819000
• ↑ https://engineering.mit.edu/engage/ask-an-engineer/what-is-a-short-circuit/
• ↑ https://www.coynecollege.edu/how-to-deal-unsafe-electrical-wiring/
• ↑ https://www.osha.gov/sites/default/files/2018-12/fy07_sh-16586-07_4_electrical_safety_participant_guide.pdf
• ↑ https://ask-the-electrician.com/how-to-fix-a-overloaded-circuit-breaker-problem/electrical-wiring-2/
• ↑ http://thecircuitdetective.com/treeshort.php
• ↑ https://consumer.ftc.gov/articles/warranties
• ↑ https://tools.niehs.nih.gov/wetp/public/Course_download2.cfm?tranid=2495

About This Article

• Send fan mail to authors

Did this article help you?

Featured Articles

Trending Articles

Watch Articles

• Terms of Use
• Privacy Policy
• Do Not Sell or Share My Info
• Not Selling Info

wikiHow Tech Help Pro:

Level up your tech skills and stay ahead of the curve

• Circuit Breakers
• Connecticut Electric
• Crouse-Hinds Cooper
• Eaton Cutler Hammer
• Federal Pacific
• Thomas Betts
• Westinghouse

Motor Controls

• Allen Bradley
• Appleton Electric
• Cutler Hammer
• E.M. & Wiegmann
• Joslyn Clark
• Killark Electric
• Moeller Electric
• NSI Industries

Transformers

• Dongan Electric
• Hammond Power

Circuit Breaker Keeps Tripping: Causes, Troubleshooting and Solutions

• 27 Jun, 2023
• Posted by: Circuit Breaker Wholesale

Dealing with a circuit breaker that keeps tripping without any load can be frustrating and worrisome.

If you find yourself constantly resetting the breaker without a resolution, it is crucial to understand the underlying causes and discover effective solutions.

In this comprehensive guide, we will explore common wiring problems that lead to breaker trips and provide expert guidance on how to address them.

By understanding and rectifying these issues, you can ensure a safe and reliable electrical system in your home or building.

Let's dive into the reasons behind circuit breaker trips without load and learn how to resolve them.

Understanding Why Your Circuit Breaker Keeps Tripping Without Load

To effectively address the issue, it is important to understand why your circuit breaker keeps tripping.

Although it may seem like there is no load present , there is always some electrical load in the system. This is because components such as capacitors, diodes, and transistors continuously conduct small amounts of current, even when devices are turned off.

Therefore, the notion of tripping without load is actually inaccurate. The key question is, what is causing the circuit breaker to trip despite minimal or no additional load?

Wiring Problems Leading to Circuit Breaker Tripping:

Several wiring problems can contribute to circuit breaker trips without load. Let's explore the three most common issues and their solutions:

Current Leakage:

One potential cause is current leakage, where one or more input wires experience small amounts of current flow. Although this can be frustrating, it is actually a safety precaution to protect against electrical hazards.

To address current leakage , it is crucial to identify the source of the leakage. This may involve inspecting the insulation, wire jackets, and connections for any signs of damage.

Seeking assistance from an electrician can help diagnose and rectify current leakage issues, ensuring a safe electrical system. 

Damaged Wires:

Damage to the wiring can also result in circuit breaker trips without load.

Insects or other pests may have caused significant damage by chewing on the wires. Even under low loads, such damage can disrupt the electrical flow and trigger the breaker.

Resolving this issue requires a thorough inspection of the wiring system. Identifying any areas with frayed, exposed, or damaged sections and repairing or replacing the affected wires will help restore proper functionality and prevent future trips.

Loose Wire in an Outlet:

A loose wire in an outlet is another frustrating wiring problem that can cause frequent breaker trips. This issue is particularly common in outlets equipped with a GFCI Outlet .

A loose wire disrupts the electrical connection and prompts the breaker to trip repeatedly.

Resolving this problem requires replacing the outlet or repairing the wiring connection. It is crucial to seek the expertise of a qualified electrician to ensure the task is performed safely and accurately.

Seeking Professional Assistance

While the provided solutions are applicable to a circuit breaker tripping without load, it is important to seek professional assistance if the problem persists.

A certified electrician can conduct a thorough inspection of your electrical system to identify any underlying issues.

They may recommend load balancing techniques, upgrading the electrical infrastructure, or addressing other potential causes of breaker trips. By relying on their expertise, you can prevent future disruptions and ensure a stable electrical system.

Preventing Circuit Breaker Tripping

Implementing preventive measures can significantly reduce the likelihood of circuit breaker trips without load. Consider the following steps: 

Regular Maintenance:

Schedule periodic inspections and maintenance of your electrical system by a certified electrician. They can identify potential wiring problems, loose connections, and other issues before they escalate. Regular maintenance helps keep your electrical system in optimal condition, minimizing the risk of breaker trips. 

Proper Grounding:

Ensure your electrical system is properly grounded. Grounding provides a safe path for electrical current in the event of a fault, reducing the likelihood of circuit overloads and breaker trips. A professional electrician can verify and enhance the grounding system if needed. 

Evaluate Electrical Appliances:

 Periodically assess the electrical appliances and devices connected to your circuits. Older appliances may draw excessive power, leading to breaker trips. Consider upgrading outdated or energy-inefficient appliances with newer, more energy-efficient models. This not only reduces the risk of breaker trips but also lowers energy consumption and utility costs.

Install Dedicated Circuits: 

If you have high-demand appliances or equipment that consistently cause breaker trips, consider installing dedicated circuits. Dedicated circuits provide exclusive power sources for specific appliances, minimizing the chances of overloading and tripping the breaker. Common examples include refrigerators, air conditioners, and washing machines. Checking your breakers and circuits using a circuit breaker finder can be helpful.

Educate Household Members: 

Promote awareness and responsible electricity usage among household members. Encourage them to evenly distribute electrical loads, avoid overloading circuits, and promptly report any electrical issues. By practicing safe electrical habits collectively, you can prevent unnecessary breaker trips and maintain a stable electrical system.

Dealing with a circuit breaker that keeps tripping can be frustrating. However, by understanding the underlying causes, such as current leakage, damaged wires, and loose connections, you can take appropriate steps to effectively resolve the issue.

Remember, electrical repairs should always be entrusted to experienced professionals to ensure safety and prevent potential hazards. Once the necessary repairs are completed, you can enjoy a stable electrical system, free from the inconvenience of frequent breaker trips.

Proactive maintenance, periodic inspections, and timely repairs will help ensure the smooth functioning of your circuit breakers, promoting a safe and reliable electrical environment in your home or building.

By addressing wiring problems promptly and following preventive measures, you can minimize the likelihood of circuit breaker trips without load and maintain a well-functioning electrical system.

How can you fix a breaker that keeps tripping?

To resolve a breaker that keeps tripping, follow these steps: 

- Identify the cause: Determine if the breaker is tripping due to an overload, short circuit, or ground fault. This will help you address the specific issue effectively.

- Unplug devices: If overloading is the cause, unplug some devices from the circuit to reduce the electrical load.

- Reset the breaker: After unplugging devices, reset the tripped breaker by flipping it to the "off" position and then back to the "on" position. This should restore power to the circuit.

- Distribute loads evenly: If overloading is a recurring problem, redistribute the electrical loads across multiple circuits or consider installing dedicated circuits for high-demand appliances.

- Consult a professional: If the breaker continues to trip or if you suspect an underlying wiring issue, seek the assistance of a qualified electrician. They can diagnose and resolve the problem safely and effectively. 

What causes a breaker to trip repeatedly?

A breaker can trip repeatedly due to various reasons, including:

- Overloading: When the electrical load on a circuit exceeds its capacity, the breaker trips to prevent overheating and potential fire hazards.

- Short circuits: A short circuit occurs when the hot wire comes into direct contact with the neutral wire or ground wire. This can result in excessive current flow and cause the breaker to trip.

- Ground faults: Ground faults occur when a hot wire comes into contact with a ground wire or a conductive surface. This can also lead to excessive current flow and trigger the breaker.

- Wiring issues: Damaged or faulty wiring, loose connections, or faulty breakers themselves can cause repeated trips.

Identifying the specific cause is crucial to effectively addressing the issue and preventing future trips. 

Is a breaker bad if it keeps tripping?

Not necessarily. While a breaker that keeps tripping can indicate an underlying problem, it does not necessarily mean that the breaker itself is faulty. Breakers are designed to trip and interrupt the electrical flow when they detect potential dangers like overloads, short circuits, or ground faults. This is a safety feature intended to protect the electrical system and prevent hazards.

However, if a breaker consistently trips even when the electrical load is within the circuit's capacity, it could indicate a faulty breaker that needs replacement. A qualified electrician can assess the breaker's condition and determine if a replacement is necessary.

Remember, it is important to consult a professional to diagnose and resolve breaker tripping issues, ensuring the safety and proper functioning of your electrical system.

5+ Reasons Why Your Breaker Keeps Tripping – And How to Fix It

Your breaker may trip due to circuit overload, short circuits, ground faults, outdated wiring, or a faulty breaker. Follow tips to fix each issue and ensure safety.

Your circuit breaker will trip once in a while if it detects an electrical fault. After all, that’s what it’s designed to do. Without the breaker, you could be putting yourself, loved ones, and property at risk of electrocutions and fires. But what if the breaker keeps tripping and leaves you in pitch darkness?

Before you call an electrician, consider implementing the tips below. You’ll discover the root causes and what to do if your breaker keeps tripping.

Disclosure: As an Amazon Associate, this site earns from qualifying purchases. Thanks!

Why Does My Breaker Keep Tripping?

If your breaker frequently trips, examine your electric power system to determine if the issue results from one of the following causes.

Hey hey! Don’t forget to subscribe to get our best content 🙂

Type your email…

Circuit Overload

Have you checked whether you’re dealing with an overloaded circuit? A circuit overload occurs when the wires receive more electrical current than they can handle.

Each circuit has a maximum current it can handle. The breaker will trip if it detects that the current exceeds the circuit’s capacity.

Often, a circuit overload happens if you’ve plugged multiple appliances, including high-power devices, into the circuit. You might notice that power goes out in your kitchen or living room when the breaker trips. That’s a telltale that a single circuit in either of the rooms is powering multiple appliances.

• Disconnect all the devices and reset the breaker.
• Before connecting an appliance, allow your electric power system to rest for a few minutes. Plug in your devices one at a time.
• If it trips again as you plug in the devices, relocate the appliances to other outlets.
• If the breaker continues to trip, call an electrician to troubleshoot the problem.

Short Circuit

A short circuit might be another reason why your breaker keeps tripping. Unlike circuit overloads, short circuits have more potential to cause fires.

A short circuit happens when a live or “hot” wire touches a neutral wire. When the two wires touch, they cause a sudden surge of current through the wires. This surge leads to a circuit overload, which causes the breaker to trip. If your circuit breaker fails to trip, it can put your property at risk of fire.

To know whether the culprit is a short circuit, you can look for sparks, smoke, burning smells, or popping sounds. A short circuit will occur in a switch, outlet, or within the circuit breaker due to the following reasons:

• Slipped wires
• Damaged wires
• Loose connections

Do you know what to do if your breaker keeps tripping? Unless you have professional experience, avoid trying to fix a short circuit in your electric power system. The affected cables can instigate fire and further damage. You may also get electrocuted. Call your electrician to fix the problem.

Ground Faults

When it comes to ground faults, a live or “hot” wire touches a ground wire or the breaker’s outer casing. This contact causes a sudden surge of current passing through the breaker. The breaker will trip if it detects more electricity than it can handle.

Ground faults occur when water enters the appliance or an outlet. If it touches the hot wire, the current changes its route and follows the water path. This might cause electrocution if you touch the water with bare hands or feet.

Thankfully, the National Electrical Code (NEC) requires buildings to install Ground Fault Circuit Interrupter (GFCI) outlets . These outlets can detect ground faults and cut off the current.

• Find where the water is coming from and fix it. If it’s damaged roofing directing rainwater into the box, call a roofer to fix it.
• Replace damaged wiring. Call your electrician to replace the damaged wiring to avoid causing further damage.
• If you’ve not installed GFCI outlets, call a licensed electrician to install them for you.

Outdated Wiring

Outdated wiring is prevalent in older homes. If you live in an old house, you’re likely to have a breaker that keeps tripping. The electric power system in that home can only handle low-power devices. If you plug in modern appliances, you might experience frequent breaker trips due to circuit overload.

Old aluminum wires might melt when the circuit overloads. The melting cables might burn the plastic casing, causing a fire.

If you check the insulation in one of your outdated wires, you might find it deteriorating. When this insulation touches a conductor, it can cause a ground fault.

According to the National Fire Prevention Association (NFPA), faulty wiring leading to electrical failure is one of the main causes of fires in residential areas. The wiring can be outdated if you live in a house over 40 years old. Outdated and faulty wiring will likely cause a fire during overloads or short circuits.

The only way to fix outdated wiring is to have it replaced. Find a professional who’ll inspect the wiring and upgrade it.

A Bad Circuit Breaker

If your breaker doesn’t stop tripping even after fixing some or all of the above causes, then your breaker might be faulty. Sometimes, a breaker will trip even when it’s newly installed. This might be due to an undersized breaker, manufacturer’s defect, or loss of efficiency. If one of these is the case, your breaker will trip even if there are no overloading, short circuits, or ground faults.

When inspecting your old wiring, check whether you’re working with an old breaker. It may no longer produce electricity for your modern appliances if it’s old. You should also check whether the breaker is tripping due to a lack of maintenance.

Avoid tampering with your faulty breaker, especially if you don’t have the necessary skills. Call a certified electrician to diagnose the problem and fix it. If your breaker is old or beyond repair, they can replace it.

How To Reset a Tripped Breaker

If your breaker won’t stop tripping, resetting it is the first thing you might consider. Resetting the circuit breaker is a great way to determine what causes the tripping.

To reset your breaker:

• Locate the appliance’s handle or switch and move it to the “OFF” position.
• Before this, ensure you’ve unplugged all the devices.
• Move the switch to the “ON” position.

When turning the switch on, the breaker might produce sparks that might cause a fire or electrocution. To be safe, avoid standing near and directly facing the panel. You can stand at the side or a few steps back. After resetting, allow the breaker to rest for a few minutes before plugging in your devices. Now you know what to do if your breaker keeps tripping.

The following are some of the most common questions people have asked about circuit breakers.

How can you tell if your circuit breaker has gone bad?

The following symptoms should help you know that your circuit breaker has gone bad:

• Frequent tripping
• Unable to reset
• Burnt smell
• Scorch marks on its box
• Visibly damaged breaker
• Worn-out breaker
• Hot circuit breaker

What causes the breaker not to reset?

A breaker might fail to reset if it has gone bad. The breaker won’t reset if you’ve plugged in too many devices that consume a lot of power.

What is the average life of a circuit breaker?

The Consumer Product Safety Commission (CPSC) states that the lifespan of breakers is between 30-40 years . Factors such as fluctuating voltages and poor power ratings can affect the life of your breaker.

Jeff (pen name for privacy) is our primary contributor. Previously, he has worked at 84 Lumber as a manager trainee and contractor sales rep. Before that, he worked for a local plumbing firm doing everything from rough-ins to septic repair and more.

Similar Posts

5 Key Factors for Choosing Fiber Optic Conduit Size

Exact Cost to Run Electricity to Shed: 5 Crucial Expenses Uncovered

17 home electrocution statistics: essential safety insights.

What Is a Soldering Gun & What Is It Used For?

What Is a Fish Tape & What Is It Used For?

5 Expert Tips for Cutting Electrical Conduits Precisely

Discover more from journeyman hq.

Subscribe now to keep reading and get access to the full archive.

Continue reading

• Search forums

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

• Electrics UK

Main electrics switch keeps tripping...

• Thread starter Beats
• Start date 5 May 2011

oh dear - for some reason the picture is upside down. it's the right way round on my computer, sorry about that.  

It shouldn't harm your studio equipment AFAIK. The trip switches prevent any danger coming to you and hopefuly any from any damage coming to your equipment. Out in the entertainment industry world our power distro boards have protection from MCBs and RCDs. Obviously to prevent any danger from coming to us, then they do trip. the equipment is still fine. You say the landlord is sending a sparky around? Hopefuly they'll beable to quickly find and correct the problem  

EFLImpudence

That's ok I can read Australian. It could be caused by damp. Do you have any outside fittings or accessories? Lamps with water in them? Sockets, for example.  

securespark

Done 2/3 years ago and not compliant with either 16th or 17th Ed. Regs?  

EFLImpudence said: That's ok I can read Australian. It could be caused by damp. Do you have any outside fittings or accessories? Lamps with water in them? Sockets, for example. Click to expand...

Heinz57 said: It shouldn't harm your studio equipment AFAIK. The trip switches prevent any danger coming to you and hopefuly any from any damage coming to your equipment. Out in the entertainment industry world our power distro boards have protection from MCBs and RCDs. Obviously to prevent any danger from coming to us, then they do trip. the equipment is still fine. You say the landlord is sending a sparky around? Hopefuly they'll beable to quickly find and correct the problem Click to expand...

securespark said: Done 2/3 years ago and not compliant with either 16th or 17th Ed. Regs? Click to expand...

ban-all-sheds

You know the environment better than anyone here. What's your assessment of the danger of losing all the lights and the fire detectors because of an unrelated fault?  

Beats said: There are motion sensitive security lamps at the front and back of the property. They can either be set to be on permanently or come on when something comes close by. I don't think i can turn them off completely Click to expand...

electronicsuk

Beats said: securespark said: Done 2/3 years ago and not compliant with either 16th or 17th Ed. Regs? Click to expand...

holmslaw said: electronicsuk said: but it isn't compliant in that you have a single point of failure for the entire installation. Click to expand...

holmslaw said: Oh dear, you still seeing imaginary words, I've just looked at 314.1 and I couldn't see the words 'single point of failure'. I don't think you really know what the term means and how costly it is to eliminate 'single points of failure'. A little knowledge ..............., I'll leave you to fill in the missing words. Click to expand...

Is all the electronic equipment actually unplugged at night or just switched off or in standby. The mains filters could still be in circuit. This, along with any minor leakage on the outside lighting or off peak heating perhaps, could be causing the trip.  

DIYnot Local

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

Similar threads

• 12 Feb 2010
• MattMunro65
• 30 May 2006

• 30 Dec 2010

We have extended our hours for summer! We work for our customers 7 days a week until sundown for home emergencies. We are Here for You!

• (301) 389-5450

Why Your Circuit Breaker Keeps Tripping & How to Fix It

Have you noticed that your outlet keeps tripping? At first, it may seem like a one-time problem, but when it consistently happens, you’ll need to get to the bottom of it. Whether you are having problems with your circuit breaker, outlets, or any other aspect of your electrical system, it’s important to consult experienced electricians who can find the right solution to your issues.

Consistent tripping not only disrupts your daily routine but can also be a potential red flag for more significant underlying issues. Electricians with ample experience can find the cause of the problem and the right solution to ensure the safety and reliability of your circuit breaker and the overall electrical system.

By seeking professional guidance, you can restore peace of mind and avoid potentially hazardous situations associated with electrical malfunctions.

Is It Dangerous If a Circuit Breaker Keeps Tripping?

If your circuit breaker is consistently tripping, it can potentially pose some safety risks. The main concern is that when the breaker trips, it’s a sign that there is an issue within your electrical system. If left unaddressed, these issues could lead to overheating, electrical fires, or damage to the system itself.

So, while the tripping itself isn’t harmful, it serves as a warning signal that there’s an underlying problem that, if ignored, could result in hazardous electrical incidents. It’s important to address the cause promptly with electrical inspections to maintain a safe electrical environment.

What Causes a Breaker to Keep Tripping?

There are many reasons a breaker keeps tripping. From overworking your electrical system to having appliances improperly installed, you need to ensure that your home is safe and secure before using electronics or other items that require electricity.

If you notice any of these issues in your home, reach out to an electrician immediately:

• Your Circuits Are Overloaded: A circuit breaker gets its name because it is made to break the circuit when there is too much current running through it. If you have a 20 amp circuit, for example, and you try to run 30 amps through it, the circuit breaker will block the circuit and trip to keep your home safe from the amperage overload. If you have too much plugged into one outlet, try unplugging some of the things connected to the outlet.
• You’re in Need of a Heavy-Up: Alternatively, you could contact one of our electricians at GAC Services to find out how many amps your circuit can handle and make sure your appliances aren’t running at a higher amperage! If that’s the case, you may be in need of an upgrade or heavy-up.
• Your Circuits Are Shorting: This problem is a little more serious, as it has to do with the actual wiring in your home. There are different wires attached to your outlet. When two hot wires touch each other, or a hot wire touches a neutral wire, this can cause a short. If you suspect this may be the issue, it is best to have an expert check it out.
• You’re Experiencing a Ground Fault: Just like a short circuit, a ground fault happens when the hot wire touches something it shouldn’t, such as the metal outlet box. Just like a short, it is best to have a professional take a look if you suspect this is what is causing your circuit breaker to keep tripping, since hot wires can be very dangerous.
• Your Appliances Are Faulty: Sometimes, a faulty appliance (even something simple like a hair dryer, toaster, or lamp) can cause a circuit to trip over and over again. This issue is usually easy to diagnose, and the best way to get rid of the problem is to replace the appliance!
• You Have Bad Wiring: If an outlet has not been wired correctly, this can cause the breaker to trip. If you keep getting the same results from an outlet, no matter what you try, it’s time to have an electrician check the outlet to make sure the wiring was installed correctly.

What to Do When a Circuit Breaker Keeps Tripping

If you have a circuit that tends to trip over and over again, there are several things you can do. If the circuit has way too many things plugged into the circuit, you may want to unplug a few appliances and see if this fixes the problem.

If just one appliance is causing the issue, plug a different appliance in and see if the circuit trips. If it doesn’t, then you know that the appliance is likely the problem—and that means it’s either time to replace the appliance or get a dedicated electrical panel or circuit breaker installed.

If an overloaded circuit or a bad appliance doesn’t seem to be the problem, it is time to call an expert in. It is a good idea not to take care of electrical issues yourself, since handling wiring and electrical components in your home can be dangerous.

If you need help with any electrical repairs in the Gaithersburg area, reach out to the team at GAC Services . Our dedicated technicians will thoroughly inspect and repair your system and ensure your safety. Contact us today or call us at (301) 835-1095, and we’ll figure out what is tripping the breaker.

Financing Options Available

At GAC, we understand how important a functioning HVAC system is for your home. This is why we offer flexible financing options to help you take care of your new HVAC purchase, so you can get back to taking care of what matters most to you.

Priority Maintenance

A well-maintained HVAC system can save you from having to invest in costly repairs down the road. Learn more about the priority maintenance services offered by GAC Services.

GAC Services

227 e. deer park drive, gaithersburg, md 20877, main office: (301) 389-5450, license numbers, license # wssc: 72505, license # hvac: 02-7541, license # electric: 4172, emergency services available, weekdays: 7 am - 6:30 pm, saturdays: 7:30 am - 4 pm, sundays: 7:30 am - 4 pm, © 2024 gac services. all rights reserved // privacy policy // terms and conditions.

Daylight Electrician Singapore Articles / Blog

• Power Failure

Power Trip At Home? 3 Reasons Why Circuit Breaker Keeps Tripping And How To Fix It

• Author : daylightadmin4

Electrical Issues? Whatsapp Us for Help! WhatsApp Us For Enquiry!

In Singapore, power trips are a frequent electrical emergency faced by homeowners. This occurs when the current in a circuit breaker exceeds the prescribed amount, thereby cutting off the electric supply. 

Although a power trip prevents damage to the wiring and other appliances, it can also result in a blackout. So to prevent it, here are some reasons why a power trip may occur in your circuit breaker and how you can resolve it. 

3 Reasons Why Circuit Breaker Keeps Tripping

Overloaded Electric Circuit

One main reason why a power trip happens is because of the electrical circuit getting overloaded beyond the prescribed limit.  When the current exceeds the rated capacity of the wiring, it can get damaged or create a fire hazard.  In order to prevent an actual fire from taking place, a circuit trip occurs. 

Connecting multiple electrical appliances to a power supply may also cause the power supply to trip. Malfunctioning appliances in particular may use up more power, increasing the total current supply and causing the circuit breaker to trip.

Short Circuit

A short circuit can also cause an HDB circuit breaker trip . One way to identify this is by checking for burning smells. Usually, a Short circuit occurs when the hot wire (black) touches a neutral wire (white).  A surge in current supply can also happen when electrical wiring with damaged insulation come into contact with each other. Damaged appliances or lighting components with wiring problems can also cause a short circuit when plugged into an outlet.

Ground Fault 

Besides short circuits, a power trip can also happen because of a ground fault. . When the circuit breaker’s hot wire comes into contact with the ground, the resistance is lowered and causes increased current.  A hot wire (black) which makes contact with a metallic object can also cause a circuit breaker trip to occur. 

Ground faults can also happen when homeowners ignore general electricity safety tips . Furthermore, this can cause a highly dangerous accident such as an electrical shock from switches or sockets . 

How to Fix a Power Trip

Overloaded Electric Circuit 

• Firstly, switch off all electronic appliances, gadgets, and light installations in the house.
• Next, switch on  all low power consumption electrical devices.  
• Now turn on your high power consumption appliances gradually until an electric trip occurs. Note down which high power consumption devices were connected when the trip happened.
• Whichever appliance has caused an increase in the power supply is likely to be the cause of your power trip.
• After determining the cause of your power trip, you can Connect the high power consumption electric appliance to another electric circuit to avoid another electric trip.
• Alternatively, you can upgrade your electrical wiring and hardware to carry the additional power load. While waiting for the wiring to be upgraded, you should minimize the use of appliances that consume more power as much as possible. You can also switch off all other appliances when only one is being used.

Compared to a power trip caused by overloading, fixing one which results from a short circuit is usually more difficult.

Usually, in the case of a short circuit, there is a massive spike in current which results in burning (causing a bad smell and discoloration). In that case, the electrical outlets should be switched off, and each of the power points and sockets should be inspected for any discoloration or smell. The insulation of the wiring should be checked as well. Furthermore, all the appliances should also be inspected for damage or odor. Usually the appliance with a short circuit will stop working and will have to be replaced or repaired.

Since most homes and offices have concealed wiring , it is not easy to inspect the wiring for damage or short circuit. Moreover, it is not easy to find out the exact condition of the wiring to detect any damage which has occurred. 

During monsoon seasons, an increase in the moisture levels or wet walls may cause a short circuit. Unfortunately, most property owners do not have the tools and experience to detect the damage to the concealed wiring. Hence it is advisable to hire the services of a licensed and experienced electrician who can accurately detect the short circuit and conduct an electrical wiring repair or replacement.

• Switch off all appliances and unplug them from the electric circuit.
• Switch on the circuit breaker .
• If there is no electric trip, each of the appliances should be connected to the circuit. Once the defective appliance is connected, the circuit breaker will trip.
• The faulty appliance should be repaired or replaced to prevent another ground fault.

If the circuit breaker continues to trip, it’s p o ssible that you might have electric wiring mistakes present. In that case, you should contact a reliable electrician to check the wiring and fix it if needed.

Depending on the cause of the electric trip, the property owner can either fix it himself or hire the services of a well-trained licensed electrician in Singapore.  If you opt for the latter, you can contact someone from Daylight Electrician Singapore  with many years of experience in providing all kinds of electrical services .

Daylight Electrician Singapore provides complete electrical services including emergency electrician service in Singapore. Our network of electrical workers and EMA licensed electricians are specially trained to execute all kinds of electrical repairs and works including electrical installation such as light installation , ceiling fan installation , power failure recovery as well as electrical wiring and rewiring , power socket , electrical switches , light switches and DB Box replacement . We have over 10 years of electrician experience and have done thousands of electrical works for both residential (Landed, condo and HDB electrician) and commercial electrician. We are the highly recommended electrician in Singapore with many happy customers and positive reviews over the years both on Google and Facebook . WhatsApp us at +65 8241 0032 for transparent quotation and honest pricing for all your electrical needs or Call us at +65 6909 9921 . We offer a fast and efficient service to serve any of your electrical needs!

#1 Recommended Electrician in Singapore. WhatsApp us now at +65 8241 0032

Recent Posts

• Why Your Light Switch Is Not Working and How To Fix It?
• Should I Choose Zigbee or Z-Wave Smart Switch Communication Protocol?
• A Guide To Buying The Right Smart Switch For Your Home
• Myths About Home Smart Switch Installation
• Factors Which Should Be Considered Before Installing A Doorbell
• 24/7 Electrician Services
• Electrical Installation
• Electrical Maintenance
• Electrical Wiring
• Electrical Works
• Electrician Singapore
• EMA licensed Electrician Singapore
• Find a reliable Electrician Singapore
• Light Installation
• Uncategorized

© 2022 Daylight Electrician Singapore• All Rights Reserved. Terms of Service • Privacy Policy 

Why does my fuse box keep tripping?

A tripped fuse box can occur at the most inconvenient moments. Fuses are a safety measure used in electric circuits. If there’s an electrical fault or excessive current flow, the fuse will break the circuit, causing your power to go out. You’ll find fuses located in the fuse box and inside electrical appliances or their plugs.

Fortunately, it’s usually pretty easy to identify the root of a tripped fuse and reset a trip switch yourself. Don’t be left in the dark! Follow our helpful guide and find all you need to know about how to identify and fix fuse box-related issues.

How does a trip switch fuse box work?

Modern fuse boxes consist of trip switches that turn off a home’s electricity as a failsafe. This occurs when there’s an electrical fault or too much power flows through a circuit.

There are two types of fuse boxes – modern trip switch fuse boxes and traditional fuse boxes, which are more common in older homes. These have fuse wires that need replacing when they break. Today, in most homes, trip switch fuse boxes don’t use traditional fuses. Instead, they use safety switches like circuit breakers or RCDs (residual current devices).

Looking to learn more about fuse boxes? Find out more with our fuse box guide .

Where can I find my fuse box?

You’ll usually find your fuse box in a utility room, porch, garage or cupboard under the stairs. Essentially, it should be in an accessible location so that if your lights go out, you can access it safely.

Why has my fuse box tripped?

Are your sockets not working? Have your lights gone out? You’ve likely tripped a fuse switch. The easiest way to tell is by checking your fuse box to see if any electric breaker switches have flipped downwards. If they have, you’ve either overloaded a circuit with too many electrical appliances, or one of those electrical appliances is faulty. Before you flip the switch and turn your power back on, you must work out what’s causing the problem.

Overloaded Circuit

Electrical circuits can only handle a certain amount of electricity. If you’re boiling your kettle, using your toaster, charging your phone, watching TV and running your dishwasher all on one circuit, you could overload it. This causes the fuse switch to blow, resulting in a tripped fuse.

Extension leads are often the source of the problem. Even though they have multiple sockets, you shouldn’t use them all at once. Doing so puts excessive pressure on a circuit and may be why your electricity keeps tripping.

Faulty Electrical Appliance

A faulty electrical appliance can force a tripped fuse. There might be a problem with the wiring or the appliance may be old and worn out. Can’t work out which appliance is the culprit? Look at your fuse box – the switches might be labelled, helping you identify the location of the faulty circuit. When you know the location, try to remember which device you plugged in last – this is often the source.

If your box isn’t labelled or you can’t narrow down the problem, there’s only one solution. Unplug every device in your home, reset the switch (more on this below) and plug them back in, one at a time. It’s time-consuming, but should help you identify the problem.

Here’s a tip: the cause will likely be the last appliance or light fixture you used. Trip switches are sensitive, so they’ll kick into action as soon as there’s an issue.

How to fix a tripped fuse box

Once you’ve identified the cause, you can reset the fuse box. Do not use any faulty appliances until you’ve checked them. Unless you know what you’re doing, it’s best not to carry out electrical repairs yourself. Instead, get in touch with a qualified electrician. Or, if an appliance is new and under warranty you can return it. With proof of purchase, you should be able to get a refund or a replacement.

Reset your fuse switch

Today, most homes have trip switch fuse boxes installed with electrical fuse breakers. These switches flip down when they need to trip the electrics.

• They’re straightforward to reset – all you need to do is switch them back into the ‘on’ position.
• If you have attempted to reset your fuse switch, but it keeps tripping, there’s likely a problem with one of your appliances or sockets.
• If none of your electric trip switches have moved, one of the RCD switches has probably tripped. Make sure they’re turned on too.

Resetting older fuse boxes

Older properties may still feature a traditional fuse box containing fuse sockets. Each fuse socket contains a piece of wire that will physically snap or burn to break a circuit. Replacing fuse wire is relatively straightforward. Find out how to replace a blown fuse .

What if my fuse box keeps tripping?

If you can’t work out why your fuse switches keep tripping, there could be a problem with the fuse box’s wiring. Faulty electrics can be dangerous, and even with precautionary measures like RCD switches in place, it’s not worth risking your safety. Rather than looking into the problem yourself, we recommend getting in touch with a qualified electrician. They will know what they’re looking for and can fix the problem on your behalf – swiftly and safely.

Rather leave it to the experts? Fuse box tripped and unsure how to fix it? You’ll benefit from taking out comprehensive home cover. Hometree offers home care plans you can trust, with quick and convenient call-outs, a 24/7 UK helpline, and no caps on claims. What’s more, if you don’t claim, your price will always stay the same!

You may also like

How to find the best home cover

When you hear or read the words ‘home cover’, you will probably be thinking about home insurance in the traditional sense that protects your buildings and contents. However, home cover or home emergency cover protects against damage to specific areas of your home like drains, electrics and plumbing.

What is combi boiler cover?

If you’re looking for protection for your combi boiler, we’re here to help you decide on whether you need combi boiler cover, if it’s worth it, and what should be included in your cover.

How to balance your radiators

When your radiators are switched on, it’s important to look out for hot and cold spots throughout your home. While cold spots in radiators are often the result of sludge in your system (which can easily be resolved through a powerflush), a powerflush may ultimately not be necessary and chances are your radiators just need to be balanced.

We Beat or Match Any Quote

Call 0330 912 4843 and we’ll beat or match any quote.

Serious About Service

24/7 claims support & rated Excellent on Trustpilot

Cover Match Guarantee

Get a £50 gift card if you find something we don’t cover

All Gas Boilers Covered

All makes and models, regardless of age

Privacy Overview

Why Does My Circuit Breaker Keep Tripping? – Easy Fixes –

The circuit breakers in your house or building are there to protect you from the dangers of electrical faults. Therefore, it can be pretty stressful when one of those breakers repeatedly trips, especially if it’s powering something important.

Unfortunately, troubleshooting a tripping circuit breaker isn’t always straightforward. Don’t worry, though. This guide will teach you how to find and fix the problem in an efficient manner.

When your circuit breaker keeps tripping, there’s likely either an electrical fault or an overload in the circuit it protects. In order to fix it, you must first identify the culprit. That involves a simple process of elimination. There are only two main places the issue can be: in a faulty (or misused) appliance, or in the circuit itself. After a few key checks, you can usually determine the problem, fix or replace it, and be back in business.

Note: The following article is primarily focused on a home system, but most of the principles equally apply to other structures.

Why Does My Circuit Breaker Keep Tripping?

Table of Contents

Finding the root cause behind your tripping circuit breaker will require a bit of detective work on your part. So grab your sleuthing hat and pipe, and let’s get cracking!

This is a standard process of elimination: narrow-down and rule-out . Otherwise, we run the risk of chasing our own tail and wasting precious time and energy. Here is a tried and true method to find the cause:

Step 1: Identify the Behavior Of The Breaker

First, determine which way your breaker is behaving:

A) The breaker will not reset at all

• B) The breaker resets and then trips within one or two seconds
• C) The breaker resets and holds for an inconsistent amount of time, possibly even hours or days.

We’ll take these one at a time, since they each require a different approach.

This is a direct short circuit (or possibly a “phase-to-phase” short, though unlikely). This could be in the circuit wiring or in an appliance. Leave the breaker off and proceed to step 2.

B) The breaker resets and trips within one or two seconds

This indicates a “soft” short. Typically, this is a result of water grounding out the circuit. Oftentimes, this will be found with an outside buried cable or outlet box that water has compromised. A soft short can also be caused by pinched insulation on a conductor, where the copper isn’t quite touching grounded metal, but leaks current through the ultra-thin insulation. Move on to step 2.

C) The breaker resets and holds for a while

Likely, this is an overload (technically, overcurrent) situation. There is too much power demand for the breaker rating. The breaker is doing its job by removing power from the circuit because, otherwise, there is a potential fire hazard downstream! DO NOT REPLACE WITH A LARGER BREAKER!! The breaker is sized according to the wire gauge and it is important to keep the proper rating (15A=14Awg, 20A=12Awg, 30A=10Awg, etc.).

Connect with an Appliance Repair Tech

Click here to use the chatbox to speak with one of our technicians. No in-home service calls. No appointments.

Another possibility with a breaker that trips every now and then is a faulty appliance that is used sporadically. Perhaps the breaker only trips when that appliance is turned on. This is hard to identify sometimes when the faulty appliance is controlled automatically by a timer or other sensor (think about recirculation fans or Christmas lights).

Turn the breaker on to make sure everything on your list is now working. If the breaker will not stay set, just go on to the next step.

Related: What Causes A Burning Smell From The Dryer?

Step 2: Identify The Affected Circuit

To start narrowing down your hunt, you must first identify the affected circuit which the tripping circuit breaker protects. This means that you’ve got to find EVERYTHING that is connected to that circuit.

Ideally, you’ll find that each circuit breaker has a clear label telling you what area(s) of the house it serves. If that’s the case, you’re off to a good start. But there is only so much room to write on the panel labels, so you’ll need to go a bit further than that.

Before you reset the circuit breaker, make a note of which appliances or parts of your house are not working. Make a detailed list of each outlet and light that doesn’t operate. Don’t forget to check fans, too!

If you have access to a plug-in tester , that is the best option to test each outlet for power. They are fairly inexpensive, and provide valuable (though basic) information about the health of the circuit.

Note: We may earn a small commission on some purchases, at no additional cost to you. Thanks for your support!

Otherwise, you can use a lamp or other convenient plug-in device to test each outlet for power. This will let you know exactly which outlets are on the affected circuit.

Important: While you are going around and checking the circuit, unplug anything that is on that circuit. Turn off all lights that may be on that circuit as well.

Once you have all of the appliances and devices written down, move on to the next step.

Related: Why Does My Stove Keep Tripping The Breaker?

Step 3: Disable All Electrical Components On That Circuit

As mentioned in the above step, it is important to make sure ALL of the circuit loads are off. Don’t overlook loads such as:

• Lights, bath fans, ceiling fans
• Lamps, portable heaters, portable fans
• Power strips, phone/tablet chargers, nightlights
• Computers, TVs, other electronics
• Outside lights, Christmas lights, security lights
• Attic lights, basement lights

I once had a customer with a tripped circuit breaker issue that really had me scratching my head. I thought I had identified and eliminated everything on the circuit, but couldn’t figure out why the breaker still wouldn’t reset. The problem turned out to be a bad surge protector that was hidden behind a dresser in their son’s bedroom. They didn’t even know it was there, as nothing was plugged into it. But it was internally defective and causing a short circuit. Such an easy fix, though it took me over an hour to find it. So be thorough in your process and don’t assume anything!

Once you are confident you have ALL electrical loads on the circuit disconnected or turned off, proceed to Step 4.

Turn The Breaker On

Try turning the breaker on. Make sure you first turn it all the way to the off position, and then back on.

If the breaker will not reset, then you have a circuit issue. Your best bet may be to call a qualified electrician.

If the breaker resets, great! That means the problem is likely in an appliance or light fixture.

Step 4: Test Individual Appliances And Look For Patterns

Now, we’ll test each component one by one. Follow these steps:

• Turn the breaker on.
• Start by turning on all lights and fans on the circuit. Leave them on throughout the test.
• Next, begin plugging in every appliance that you had previously unplugged, waiting a minute or so between each.
• If at any point, the breaker trips, stop. Turn off the last thing you turned on before the trip. Reset the breaker. Now try turning on the device again.
• If the breaker trips again, you’ve found your culprit. It’s either the device (likely) or the outlet (unlikely).
• To be sure, try the device in another outlet on a different circuit. If that circuit trips, the device is defective.
• If it doesn’t trip the other circuit, try the device on a different outlet on the original circuit. If it doesn’t trip, then the original outlet may have a problem. Or the device has an intermittent issue that only shorts out occasionally.
• Plug the device into any outlet and see how it behaves over time. If it’s bad, eventually, it will trip the breaker again and remove all doubt.

Related: 5 Reasons Why Dishwasher Keeps Tripping Breaker

Is It Dangerous If A Circuit Breaker Keeps Tripping?

Yes, it should be considered dangerous if you have a circuit breaker that keeps tripping.

To know why, you must first understand the purpose of that circuit breaker. It’s very dangerous when too much electrical current flows through a circuit. So, a circuit breaker is installed at the front end of every circuit to prevent that from happening.

A properly functioning circuit breaker will sense excessive current in the circuit and will trip, stopping current flow. Effectively, it behaves as the “weak link” in the circuit. Without it, some other part of the circuit will inevitably fail and a fire may ensue.

Sometimes a breaker will trip from a fluke occurrence – perhaps a surge in the current flow from the utility or a lightning strike. However, if the same circuit breaker trips multiple times for unknown reasons, that means there’s either an ongoing electrical fault somewhere on that circuit, or it’s an overloaded circuit. 

Note: It is also possible that the breaker is faulty. But unless it is a really old breaker, this is actually fairly rare. Usually, the reason a breaker goes bad is because there is another problem on the circuit (or has been in the past).

Excessive breaker tripping and resetting can eventually wear out the breaker, causing it to become weak and fail to hold. Check out this helpful article on how to tell if a circuit breaker is bad.

If you don’t fix the fault and stop the circuit breaker from tripping, you run the risk of:

• Wearing out the breaker until it no longer functions as it should.
• Electrical fires starting and spreading throughout the house or building.
• Damage to any appliance on that circuit, potentially requiring expensive replacements and repairs.

So, when you have a repeatedly tripping circuit breaker, don’t just reset it and forget it. Be sure to identify what is causing the tripping. You should only fix it yourself if you have the necessary skills and tools. If not, call an electrician or other qualified individual.

Related: Circuit Breaker Is ON But No Power To The Outlet?

How To Reset A Tripped Circuit Breaker

Resetting a tripped circuit breaker is very straightforward.

A standard circuit breaker has 3 positions:

• ON : On one side, you have the ON position (usually oriented toward the center of the panel). That means the electrical current will flow through the breaker and the circuit.
• OFF : You also have the OFF position (oriented toward the outside). That will stop any electricity from flowing in the circuit.
• Center : Most relevant to this article, you have the center position. When your circuit breaker trips, it will not go to the OFF position. Instead, it’ll go to the center to indicate that it tripped and was not shut off on purpose. In this position, no electricity will flow in the circuit.

Don’t push the switch from the center to the ON position to reset a tripped breaker. Instead, do this:

• First, move the switch fully to the fully position.
• Second, move the switch all the way to the ON position.

Related: What To Check If Your Dryer Keeps Tripping Breaker?

Why Does My Breaker Keep Tripping With Nothing Plugged In?

Sometimes, it’s not an appliance that causes your circuit breaker to keep tripping. So once you rule out any problems with your devices, there are a few other things to consider.

Once you’re sure that none of your appliances are on, you’ll have to troubleshoot for:

• Short circuits: caused by problems with your electrical wiring.
• Excessive currents or voltages: from power surges during thunderstorms .
• Ground faults: when a live part of the circuit comes into contact with a grounded component.
• Faulty circuit breaker: if you have an old or defective circuit breaker at the end of its useful lifespan.

Troubleshooting the above can be pretty risky if you’re not sure what you’re doing. So, again, don’t be afraid to contact an electrician to do it for you.

Related: Top Reasons Why A Washing Machine Keeps Tripping The Breaker

Why Does My Circuit Breaker Trip Only At Night?

As you’ve seen in earlier parts of this guide, troubleshooting a tripping circuit breaker involves trial and error, as well as spotting patterns.

So, if your circuit breaker keeps tripping at night, focus your attention on appliances that only run during that time.

For example:

• Do you have automatic lights that only turn on at night?
• Do you have a HVAC (heating, ventilation, air conditioning) system that runs at night?
• Do you have computer systems or similar equipment that run at night?
• What about security lights that are motion triggered?

Once you narrow down the appliances that might cause the circuit breaker to trip only at night, troubleshoot them one at a time using the same steps described above.

For example, you can plug the appliances into different circuits in your house to see if they trip other circuit breakers instead.

Why Does My Circuit Breaker Trip After 30 Minutes?

After resetting a tripped circuit breaker, you might find that there’s a slight delay before it trips again. That delay could be 30 minutes or even a few hours before the breaker randomly trips again.

There are a couple of reasons that can cause this:

• Overload: If a circuit is only slightly overloaded, the beaker might not trip immediately. Typically, there are a variety of loads on a circuit, and the draw of those loads can fluctuate regularly as they are being utilized.
• Intermittent Use: Many of the loads on a circuit are not being used at all times. So, if there is a defective appliance or device, the circuit only trips when that particular device is utilized. For example, a refrigerator motor automatically turns on via an internal thermostat. You won’t necessarily know when that happens and therefore not suspect it.

In short, you must check for electrical faults in:

• All appliances plugged into that circuit, like lights, TVs, kitchen equipment, and anything else.
• All power sockets and switches on that circuit, including wall switches and wall outlets that you plug appliances into.
• Last of all, check electrical wiring for that circuit, which might have been chewed on by pests or otherwise damaged.

How To Fix A Tripped Breaker That Won’t Reset

When you try to reset your circuit breaker, but it trips instantly, that’s usually a telltale sign that there’s a short circuit. However, it could also be a worn-out breaker .

Do not try to force the circuit breaker to stay on. Instead, you must troubleshoot the circuit and fix the root cause first. Refer to the Step 3 above.

Why Does My Breaker Trip After A Few Seconds?

Suppose you successfully reset the circuit breaker, but it trips after a few seconds of delay. In that case, you likely have a ground fault in the circuit caused by water intrusion.

Since water is not a great conductor (as compared to most metals), it can take some time for the electricity to short out. A ground fault occurs when the electricity flows straight to the ground instead of going through the circuit normally.

Again, you must resolve the root cause of this issue before you can turn your circuit breaker back on again.

Final Thoughts

If your circuit breaker keeps tripping, it’s critical that you figure out why. Continuing to reset the breaker without addressing the problem will eventually result in a worse situation, including:

• A worn-out breaker that will stop tripping when it should, greatly increasing the chance of fire.
• A worn-out breaker that will no longer reset and hold.
• Permanent damage to the device or appliance that has a fault issue.
• Electric shock to the user of the device or appliance that has a fault.

To be on the safe side, when you experience a breaker tripping occasionally, get the problem taken care of ASAP. That way, you can have peace of mind that everything is functioning properly.

Also Read: Why Is My Outdoor Power Outlet Not Working?

Leave a Comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

This site uses Akismet to reduce spam. Learn how your comment data is processed .

Explore Electrical Technology

Circuit Breaker Keeps Tripping: Causes and Solutions

• One of the primary causes of a tripped circuit breaker is an overloaded circuit. This occurs when the total electrical load on a circuit surpasses its capacity. It can happen if you plug in too many devices or appliances into a single circuit. The excessive current flow triggers the circuit breaker to trip, preventing potential damage.
• A short circuit is another frequent culprit behind circuit breaker trips. It occurs when a hot wire comes into direct contact with a neutral or ground wire. This connection creates a low-resistance path for the electrical current, resulting in a sudden surge and tripping of the circuit breaker.
• Similar to a short circuit, a ground fault occurs when a hot wire comes into contact with a ground wire or a grounded part of an appliance or electrical system. Ground faults can be caused by damaged insulation or faulty wiring. When a ground fault occurs, the circuit breaker senses the irregular current flow and trips to prevent potential electrical hazards.
• Sometimes, a faulty appliance can trigger a circuit breaker trip. Malfunctioning devices can draw excessive current or cause a short circuit when connected to a power source. If you notice that a specific appliance consistently trips the circuit breaker, it’s essential to have it inspected or repaired by a professional.
• Over time, circuit breakers can deteriorate due to wear and tear. Aging circuit breakers may become less sensitive or fail to operate effectively, leading to frequent tripping. If you have an old circuit breaker, it might be time to consider a replacement or an upgrade to a newer model.

• Locate the tripped circuit breaker in your electrical panel. You can usually find it in the “off” position or slightly moved from the fully “on” position. Take note of which area of your home or office is affected by the tripped circuit.
• To prevent any further tripping, unplug or disconnect devices from the affected circuit. This step helps eliminate potential causes of the overload or short circuit.
• After disconnecting the devices, reset the circuit breaker by firmly switching it to the “on” position. Listen for a distinct click or feel the resistance when resetting the breaker.
• Gradually reconnect the devices and appliances one by one to the circuit. Pay attention to any unusual sounds, smells, or signs of malfunction. If the circuit breaker trips again immediately upon reconnecting a specific device, it is likely the cause of the issue.
• Depending on the cause of the tripped circuit breaker, you may need to take specific corrective actions. These can include redistributing electrical loads, repairing faulty wiring, or replacing malfunctioning devices. If you’re unsure or lack electrical expertise, consult a qualified electrician for assistance.

• If you experience frequent circuit breaker trips, it is essential to evaluate and reduce the electrical load on the circuit. Identify the appliances or devices that are causing the overload and try to redistribute them across multiple circuits. Avoid running high-powered devices simultaneously or consider staggering their usage to reduce the strain on a single circuit.
• High-powered devices such as refrigerators, air conditioners, or washing machines can draw a significant amount of current. Plugging them into dedicated circuits can prevent overloading and minimize the risk of circuit breaker trips. Consult with a licensed electrician to assess your electrical system and determine if additional circuits or subpanels are needed for high-powered devices.
• Faulty wiring can contribute to circuit breaker trips. Inspect your electrical wiring for any signs of damage, such as frayed insulation, loose connections, or exposed wires. If you are uncertain about the condition of your wiring, it is advisable to seek professional assistance from a qualified electrician. They can identify and rectify any wiring issues to ensure safe and reliable operation.
• Sometimes, a faulty appliance can cause circuit breaker trips. If you notice that a specific device consistently triggers the circuit breaker, it may be malfunctioning or drawing excessive current. Consider having the appliance inspected by a professional technician or replacing it if necessary. Faulty appliances can pose a safety risk and should be addressed promptly.
• In some cases, frequent circuit breaker trips may indicate that your electrical system is outdated or insufficient for your power needs. Aging wiring, outdated panels, or inadequate capacity can contribute to recurring tripping. Consult with an electrician to assess your electrical system and determine if an upgrade or panel replacement is necessary to meet your current electrical demands.
• While some circuit breaker issues can be addressed through simple troubleshooting, it is crucial to recognize the importance of professional assistance. Electrical systems are complex and potentially dangerous to work with if you lack the necessary expertise. If you are unsure about the cause of circuit breaker trips or if they persist despite your best efforts, consult a licensed electrician. They have the knowledge and experience to diagnose and resolve electrical issues safely and efficiently.

• Distribute electrical loads evenly across circuits to avoid overloading. Avoid connecting multiple high-powered appliances to a single circuit and consider using different outlets for heavy-duty devices.
• Protect sensitive electronics and appliances by using surge protectors. Surge protectors help prevent voltage spikes, which can lead to circuit breaker trips and damage to your devices.
• Regularly inspect your electrical wiring for signs of wear, damage, or loose connections. Address any issues promptly by hiring a professional electrician to ensure the safety and efficiency of your electrical system.
• If you have an older electrical panel with outdated circuit breakers, consider upgrading to modern ones. Newer circuit breakers offer improved safety features and increased reliability, reducing the likelihood of tripping.

•  Yes, circuit breakers can trip due to reasons other than overloading, such as short circuits or ground faults.
• Signs of a faulty circuit breaker include frequent tripping, hot or burning smells, visible damage, or difficulty resetting.
• While you can attempt to reset a tripped circuit breaker, it’s crucial to identify and resolve the underlying cause to prevent future trips.
• It is recommended to hire a licensed electrician for circuit breaker replacements or any electrical work to ensure safety and compliance with regulations.
• Circuit breakers trip to protect your electrical system from overloads, short circuits, or ground faults. Identifying the specific cause can help you address the issue.
• Redistribute appliances across multiple circuits, avoid running high-powered devices simultaneously, and consider staggering their usage.
• If a specific appliance consistently causes the circuit breaker to trip, it is advisable to have it inspected by a professional technician or replace it if necessary.
• If you are uncertain about the cause of circuit breaker trips or if they persist despite your troubleshooting efforts, consult a licensed electrician for a thorough assessment and resolution.

Related Posts

Common Causes of Voltage Drop

Electrical Overloading and Faulty Wiring: Leading Causes of Electrical Fires in the Philippines

Faulty Electrical Wiring

Ground Fault: Understanding its Causes and Importance of Protection

How to prevent Short Circuits and Ground Faults?

Over Voltage in Electrical Systems

Overcurrent and Protection Against Overcurrent

More results...

• Gas & Heating
• Handyman Service
• Appliance Repairs
• Loft Conversion
• Waste Removal London
• Join Our Standby List
• Pre-Book & Pay Less
• Special Offers
• Ask a Tradesperson
• New Supplier
• Complaints Procedure
• Get Our Software
• Case Studies
• For Business

• Get an Instant Quote
• Book On Demand
• Call  0208 059 8111
• Electrical Advice

How to Fix a Tripped Fuse: A Step-by-Step Electrician’s Guide

• March 22, 2024
• Blog , Electrical Advice

• What We Discuss Here
• - What Is The Difference Between a Fuse And a Breaker?
• - What Causes a Tripped Circuit Breaker?
• - What Causes a Fuse To Trip or Blow?
• - What If My Fuse Box Keeps Tripping?
• - How To Fix an Electrical Issue At Home?
• - Signs of a Tripped Fuse
• - How To Fix a Tripped Fuse?
• - Expert Tips to Prevent Future Trips and Blown Fuses
• - How Do I Know If I've Overloaded a Circuit?
• - Safety Measures
• - When to Call a Professional Electrician

At some point, all London homeowners and landlords will likely encounter the frustrating power cut-off of a tripped fuse. For many, the first instinct might be to call an electrician immediately.

But what if there was a simple fix you could perform safely and swiftly?

This guide will explain to you how to identify and reset a tripped fuse. By the end, you'll be equipped to handle this common electrical issue on your own, saving you time and money while enhancing home safety.

Well, Before we jump into the nitty-gritty, it's important to understand the difference between a fuse and a breaker in the first place.

What Is The Difference Between a Fuse And a Breaker?

13 Amp, 3 Amp and 5 Amp fuses in the UK

NXB-125 Moulded Case Circuit Breaker

The main difference is that fuses can't be used again, but breakers can be used many times. Breakers shield homes and devices from overloading and short-circuiting, while fuses only protect against overloading.

Both fuses and breakers stop the electricity flow, but they work differently. A fuse melts metal when it gets too hot, while a breaker switches off when there's too much electricity.

What Causes a Tripped Circuit Breaker?

The main reason a circuit breaker trips is when there's too much electricity (power surge), overloading the circuit because of too many lights, devices, or appliances using the same circuit.

The main breaker is on the right side, and the other breaker is on the left side.

What Causes a Fuse To Trip or Blow?

Fuses can trip or blow if you're using more electricity than the circuit can handle. This happens when you plug in too many devices or appliances at once, putting a strain on the electrical system.

Running too many appliances at the same time can overwhelm the circuit, causing the fuse to trip. This often occurs when multiple high-power devices operate simultaneously, drawing more electricity than the circuit can safely handle.

A defective or misused appliance can also lead to a blown fuse. If an appliance has a short circuit or a malfunctioning component, it can cause a surge of electricity that exceeds the capacity of the fuse, resulting in a trip.

Overfilling kettles or having dirty toasters can create electrical problems. When water or crumbs touch electrical parts, they lead to a short circuit, resulting in a blown fuse.

Worn-out or cracked cooker rings can cause electrical faults that trip the fuse. Over time, the heating elements in cookers can deteriorate, leading to increased resistance and potential overheating.

Faulty immersion heaters can also trip fuses. If the heating element becomes damaged or the thermostat malfunctions, the circuit can overload, causing the fuse to blow.

Faulty connections on appliance leads, such as those for TVs or stereos, can result in electrical issues. Loose or damaged connections can create resistance in the circuit, leading to overheating and fuse failure.

If light bulbs frequently blow out, it could indicate an underlying electrical problem. This could be due to issues such as voltage fluctuations, poor wiring, or incompatible bulbs, all of which can cause fuses to trip or blow.

Book a Serviceteam Electrician Today!

What If My Fuse Box Keeps Tripping?

Uh-oh! Lights out? Sockets dead? Fuse box acting up again? We understand your frustration! It's common for breakers to trip or fuses to blow occasionally, but if this happens frequently, there might be a larger problem at hand.

Fuses play a crucial role in electrical circuits, ensuring our safety. When a fuse trips, it's a warning sign that something might be wrong with an appliance or wiring in your home.

If you've followed the steps above and still can't figure out why your fuse keeps tripping or if it happens repeatedly, the problem might lie with the fuse box itself.

The fuse starts to break the circuit when the current is too high, preventing electrical damage and fires.

You can usually pinpoint the problem by elimination. If the problem persists, don't hesitate to contact Serviceteam Professional Electricians in London for a reliable service.

How To Fix an Electrical Issue At Home?

Here are some steps to help you troubleshoot electrical issues at home:

Look for any faulty or damaged items that may be causing problems. If you find any, unplug or replace them.

Look for signs of burning, discolouration, or unusual smells. Check for frayed or exposed wires. If you notice any issues, it's best to call a licensed and experienced electrician to assess and repair them.

Rodents like rats, mice, and chipmunks are known for chewing through electrical wires, which can lead to dangerous situations. If you suspect pests are present in your home, contact an exterminator to address the issue.

Make sure the breaker of the correct size is being used for each circuit. Ensure that all breakers are secure, and there are no sparks or signs of burning.

Here are some signs to look out for:

• The main breaker trips, but the individual breakers seem fine.
• The breaker won't reset properly.
• You notice a burning smell coming from the electrical box.
• The circuit breaker keeps tripping frequently.
• There are signs of damage to a breaker, such as scorch marks.

If you spot any issues, contact a licensed electrician for repairs. Remember not to attempt any electrical work unless you're completely confident in your abilities.

Always prioritise safety when dealing with electrical issues. If you're unsure or don't have the right tools, it's best to hire a professional electrician who can safely handle the situation.

Signs of a Tripped Fuse

How can you tell if you're dealing with a tripped fuse ? Look for a power shut-off in one area of your home, frequently accompanied by a loss of lighting.

In some cases, the fuse box might show a red indicator or the switch corresponding to the affected area will be in an 'off' position.

[The Step-by-Step Guide]

How To Fix a Tripped Fuse?

There is no need to panic when you discover a fuse box switch is tripped; just follow these simple steps.

Before attempting to reset the fuse, the first and most critical step is to switch off all appliances and lights connected to the circuit that you suspect is tripped. This helps prevent further overload and reduces the risk of electrical hazards.

Once everything is powered down, find your electrical panel. In most London homes, this is a grey metal box found in a hallway, basement, or other utility area. Knowing where your panel is located before an emergency is crucial so you can access it easily.

The first step in fixing a tripped fuse is identifying the problem. When a fuse trips, it's typically due to an overload or short circuit in the electrical system. Start by locating your fuse box, usually found in the basement, garage, or utility room. Open the fuse box, and you'll see a series of on-off switches known as circuit breakers. Each switch controls the electricity to a different part of your home and is labelled accordingly. Scan these switches until you find one that's in the 'off' position, or if you have an older fuse box, you may notice a fuse with a visible break or burn mark.

Now you have switched off all appliances. To reset the fuse, simply flip the switch back to the "on" position. If you have a fuse system, replace it with another one with the same amperage rating.

After resetting the fuse, test the circuit by gradually turning on appliances and lights one by one to ensure the system can handle the load. If the fuse trips again immediately, it could indicate a more serious underlying issue, and you may need to seek professional help from a qualified electrician.

If the fuse remains intact after testing the circuit, you've successfully resolved the issue! However, to prevent future incidents, it's essential to address the cause of the tripped fuse. Common causes include overloaded circuits, faulty appliances, or wiring issues. Consider redistributing appliances across different circuits or having defective appliances repaired or replaced.

These simple steps allow London homeowners to quickly and safely restore power.

Expert Tips to Prevent Future Trips and Blown Fuses

• Check your appliances and devices to see if any are faulty or damaged.

👉 If you're looking for reliable electrical services, such as Portable Appliance Testing (PAT) , EICR or any other electrical need, in London, give serviceteam's professional electricians a call. Make sure to get your PAT testing done on time. It checks all the portable devices in a building or at a construction site that are connected to the main electrical supply. This includes appliances like refrigerators, electric cookers, kettles, toasters, TVs, drills, hair dryers, and anything else that you plug into a socket! Ensure your home's electrical safety for peace of mind.

• Make sure you're not overloading any circuits with too many devices plugged in.
• Unplug or replace any appliances or devices that could be causing the problem.

For Long-Term Prevention:

• Regularly inspect your electrical panel for signs of damage.
• Avoid overloading outlets with multiple devices.
• Unplug devices when they're not in use.
• Replace worn or damaged electrical cords.
• Use surge protectors to safeguard your appliances and devices from power surges.
• Avoid doing electrical work yourself if you're not trained or experienced.

How Do I Know If I've Overloaded a Circuit?

Circuits can safely handle a specific amount of electricity. Using too many devices at once can draw more electricity than the circuit can handle. This causes the fuse to trip.

If you've been using multiple appliances in one room, you've probably overloaded the circuit. Extension cords are often the culprit. Even though they have multiple sockets, it's not safe to use all of them simultaneously. Try unplugging some devices and then switch the tripped fuse back to the "on" position.

Safety Measures

When dealing with electricity, safety has to be the top priority. Therefore, make sure you wear appropriate safety gear such as gloves and, if possible, non-conductive footwear.

When to Call a Professional Electrician

If the circuit trips again immediately after being reset or the breaker switch keeps turning off without apparent cause, it's time to bring in a professional. Some problems may be too complex or dangerous for an amateur to handle, so if in doubt, seek expert help from a qualified electrician.

Remember these simple steps, and the next time your home encounters a tripped fuse, approach the situation calmly and confidently.

Our professional electricians are just a call away, ready to step in and ensure your home's electrical systems are in top-notch condition.

Related Posts

Worcester Bosch Greenstar 2000 30kW Boiler Review

Ideal Thermostat Temperature for Optimal Home Comfort and Energy Efficiency

Tools For Unblocking a Toilet Like a Pro

How to Fix Glow-worm F1 Fault?

The Ultimate Guide to Toilet Repair: Fixing Common Issues with Ease