sand rail long travel suspension kit

WE BUILD IT.

520.247.2217

3231 e. michigan st., tucson,az  85714.

This center mounted a-arm kit, can be a great up-grade from your stock VW beam suspention. Designed to graft on to your stock pan, it can be installed on Baja bug, Manx, or sand rail. Ships raw

A Arm Kit-Dual Shock

Product details.

Kit comes with upper and lower a-arms, bulk head, spindles, tie rods, and install plates, fully welded. Includes all rod ends, hi-misalignment spacers, bushings and grade 8 bolts. Has 19” of wheel travel when using a 10” coil over shock (not included). This kit has a boxed lower a-arm and accepts dual shocks. It is 70-74” over-all width (depending on wheel hub offset). Same width as bug when using 3x3 rear trailing arms. Remote mounted upper shock tower designed to fit under Baja or Manx hood.  Zero bump steer, 4 degrees of camber change, 5 degrees of caster. Laser cut, CAD designed, jig built, double shear suspension pick-ups even steering box for zero bulkhead flex. Simply cut off old beam suspension and graft on this new one or we can do it for you. Instructions included.

SHIPPING INFO

This kit fits in 2 boxes and ships most places for about $120.

• Sandrail Options and Accessories

REAR MID-TRAVEL CONVERSION KIT

Berrien Buggy’s rear mid travel conversion kit. This kit is designed to convert standard IRS Volkswagen rear suspension to a true off-road rear suspension system. This kit provides 14″ of rear wheel travel. A minimum of changes is needed to install this unit in an existing Berrien Buggy frame equipped with a stock VW rear suspension. Welding is required to install the upper shock mount on the frame. Upper shock mounts vary and are frame specific.

The kit consists of 3 subcomponents, they are; the “dual pivot conversion”, 2X3 trailing arms, and the upper shock mount kit. Shock/spring units are not included and should be purchased separately. 2″ X 12″ coil over shock units with remote reservoir are required, our part number is C986-KSPR2012-COHRS , for VW powered cars. Berrien frames with other engine or transmission combinations may require a different spring rate and/or shock valving. The three components of the kit are:

C058-BB4501 : Dual pivot conversion with rod ends. These units have an inner “stabilizer lug” which rides in a urethane knobby grommet located inside the torsion housing. This design stabilizes the unit and provides a solid mount for the 3/4″ spherical rod end of the connector link. The inner and outer plates place the mounting of the rod end/link in double shear for strength and stability. The swedged chrome moly connector link is black anodized and has 3/4″ X 3/4″ steel spherical rod ends. This link mounts to the trailing arm in double shear. By having a spherical rod end at each end of the connector link, the link is able to rotate as the swing arm moves through it’s arc of travel, eliminating any bind.

C986-AO504 : A 2″ X 3″ chrome moly trailing arms. This super duty trailing arms are constructed with 1 1/4″ chrome moly tubing, then plated and gusseted to a third 1 1/4″ square central tube. The shock mounts are welded to the bearing carrier mount at the extreme outside end of the arm and again provide double shear mounting. The bearing carriers are steel and use standard Type 1 VW components. Mounting tabs for the connector link are welded to the front tube and provide double shear mounting.

C058-BB4502 : Upper shock mount kit. The upper mounts which must be welded into the frame, consisting of the thru mounting tubes, the re-enforcement gussets, mounting bolts, nuts, and washers. Depending on Berrien Buggy chassis, mounting plates are also provided. Non Berrien frames can also use this conversion kit by using a universal version of the upper shock mount.

Installation of the kit is generally straight forward. First, the original VW torsion bars, spring plates, grommets, and pivot arms are removed from the torsion housing. The cast shock towers are cut off the torsion housing, and the cut area is ground smooth. Next, the dual pivot conversion is bolted into the modified stock housing using the urethane knobby grommet. The stub axles, bearings, and seals are installed in the bearing housing of the trailing arms. With new urethane pivot bushings installed in the pivot end of the arms, the arms are bolted into the existing stock pivot boxes (for extreme use we suggest gusseting the pivot boxes). The location of the upper shock mount is then determined (measurements included in the kit), and the mount is then fitted to the chassis and final welded. The installation of 20″ limit straps are highly recommended.

This kit offers you the ability to radically upgrade the rear suspension of your VW based buggy WITHOUT the need to build a completely new car or radically modify your existing frame. This kit is a reasonably priced upgrade that produces truly amazing results.

PART NUMBERS

Mid-travel front conversion beam (ball joint to link-pin).

Berrien Buggy by Acme now offers a front beam assembly that allows the installation of a link/kingpin mid travel front suspension on a sand rail frame built for a ball joint front beam. This product allows you to install a sturdy link/king pin front end in your existing ball joint frame with NO WELDING!

Anyone with any knowledge of the of VW style front beams knows that the main tube spacing is different between a link pin front beam and a ball joint beam. The ball joint beam has wider vertical spacing between the main tubes to accommodate the wider spread between the trailing arms, needed to work with the ball joints. Because of this spacing difference, you cannot simply bolt the link pin beam in a ball joint frame.

Also, because of the spacing difference, you cannot simply use link pin arms in a ball joint beam, especially on an off-road suspension with longer travel. You end up with zero or negative caster. The top of the king pin leans forward. In this condition, the car is almost impossible to drive as it darts from side to side and is extremely dangerous.

The solution to the problem is to change the ratio between the upper and lower trailing arms. This ratio change causes the king pin to lean back and restore proper caster. While at rest the caster in our conversion beam is 3 to 4 degrees, as the suspension compresses caster increases causing the steering to become extremely stable. The added benefit of this increasing caster is easier steering under normal driving conditions.

After several prototypes were built we finally developed the current front beam assembly. Wheel travel is approximately 12” to 14”. We have tested the front end extensively in extreme off-road conditions, including large rock climbs, with no failures. We are now ready to offer our NO WELD solution for sale.

If you currently have a chassis built for a ball joint front end and want to increase your wheel travel, and the strength of your rail, we have the solution.

The conversion beam is available in +6” or +8” longer than stock widths to accommodate the large shock/coil spring units. It is available in the following configurations:

1. Beam with 1X2 forged trailing arms:

• +6” (C058-BB4512C)
• +8” (C058-BB4513C)
• 1X2 trailing arms,
• Urethane bushings
• Thru rods & clamps
• Standard spindles
• +6” (C058-BB4506C)
• +8” (C058-bb4507C)
• KING shock/spring units (C986-KSPR2008-COHRS)**

** These shock/spring units are rated for a VW powered car with a wheelbase of 95” to 105”.

Any other chassis configurations or engine combination would require units with different spring rates and different shock valving. A total car weight and corner weights would be necessary to determine the correct spring rate and shock valving.

Please also be aware that the beam is not sold separately. It is only available with our forged trailing arms.

MID-TRAVEL FRONT BEAM

Berrien Buggy by Acme introduces a true “bolt in” solution to convert a sandrail built with a stock VW torsion type front suspension. It is designed to bolt into any frame designed to use the link/king pin front beam. There is no welding required to install this assembly which uses traditional coil over, shock/spring units for suspension. This front suspension works well with either stock style rear suspension or with our Mid Travel rear suspension conversion package.

The basic beam is manufactured using chrome moly main tubes and CNC plasma cut shock mounts. The unit is fully jig welded and comes standard with bracing as pictured. The beam is available as +6” or +8” over stock width. The extra width is necessary to accommodate the larger diameter of the shock/spring units. The beam is also designed to use as a minimum 1”X 2” forged trailing arms for link/king pin spindles. A stock VW steering box may be used or R&P mounts can be installed.

The beam is available in one of 2 levels of completion, in either width.

1. Beam only; fully welded but with no hardware.

• C058-BB4510 (+6”)
• C058-BB4511 (+8″)

2. Spindle to spindle; supplied with:

• 1×2 trailing arms, urethane bushings,
• thru rods& clamps, standard spindles, & tie rods.
• C058-BB4508 (+6”) C058-BB4509 (+8”)

ELECTRONIC POWER STEERING KIT

Berrien Buggy by Acme offers an electric power steering unit suitable for installation in your buggy. Based on a General Motors SUV power steering unit, it converts manual steering into full power steering without the hassle of pumps, lines and reservoirs. The unit comes complete with the necessary parts to install in your buggy. The mounting bracket welds to a 1 1/2″ tube, the control ECU plate also welds to the tube. Electronics have been converted from Can-Buss to a standard electrical system. Feel can be adjusted with a gain knob.

The kit part number C986-BB1010 includes the following:

Steering unit Steering mount bracket 3/4″ X 36 spline steering shaft coupler 3/4″ steering shaft with flange 3/4″ spherical rod end support ECU mount Controller box Adjustment knob Steering ECU Output U-joint for 7/8″ steering shaft Plug and play wire harness

Installation instructions Installation is fairly straight forward; After location/orientation of the steering box is decided the main and ECU mounts are welded to the 1 1/2″ cross tube, making sure the ECU plate is close enough to the steering box for the harness to reach. The output U joint is installed onto the steering unit and a 7/8″ steering shaft is cut to length, then welded over the spud on the U-joint. The length of the steering input shaft is determined then the shaft is fed through the spherical rod and welded to the coupler. The wiring is installed per the instructions and the unit is ready to work.

CUSTOM TRAILING ARMS

Berrien Buggy by Acme sells the strongest trailing arms on the market today! Made from heavy-duty chromoly 1 1/4″ OD round and 1 1/2″ square tubing, they are designed with reliability in mind. Full-length 1/4″ plate gussets make these trailing arms near indestructible.  Designed to be used with stock VW-style components.  Shock mounts will need to be fabricated.

Custom Trailing Arms, pair Stock by Stock : C986-AO500

Stock x 1″ : C986-AO501

Stock x 2″ : C986-AO502

2″ x 2″ : C986-AO503

2″ x 3″ : C986-AO504

3″ x 3″ : C986-AO505

TUBULAR FRAME HORNS

Berrien has an answer to those old, bent or rusted-out VW frame horns.  Cut them off, and replace them with our Tubular Frame Horn Kit.  Designed to fit any stock IRS, Late Swingaxle, or our 2 1/2″ Custom Torsion.  (Early Swingaxles requires a small amount of grinding the cope for a perfect fit.)  Kit includes (2) Frame Horns,(4)  Tube End Cap Gussets, and (2) 3/4″ Transaxle Mount Bolts.

Tubular Frame Horn Kit: C058-BB502

Labor to Install on any Custom Torsion:  Call for Pricing.

FRAME HORN SUPPORT KIT

Berrien’s Frame Horn Support Kits are used to strengthen the frame horns, by connecting them to the upper cage. Available only for Berrien produced chassis (please specify chassis when ordering).

Frame Horn Support Kit: C058-BB671

Berrien has two models of front bumper for your sandrail.  Both are available in stock width, or “Wide Track” +6″ width.

Our Single Bar Front Bumper mounts to the front beam of your chassis with the supplied hardware kit.  It is designed to fit around the nose of our 3-pc. Fiberglass Body, but is also suitable for use on any chassis.  Please specify Link/Kingpin or Balljoint.

Our Double-Bar Front Bumper welds to the upper arm rail at the front of your chassis, and to the lower front clamps. Please specify chassis model and Link/Kingpin or Balljoint.

Single-Bar Front Bumper: C058-BB632

Single-Bar Front Bumper, “Wide Track” +6″ Width: C058-BB633

Double-Bar Front Bumper: C058-BB634

Double-Bar Front Bumper, “Wide Track” +6″ Width: C058-BB635

Getting hung up on a tree can be a hassle, not to mention, a potential cost if your valuable suspension and driveline components are damaged in the process.  Treebars are the answer.  Designed to “funnel” trees and other obstructions away from your rear wheels, the treebars will also provide a convenient “step” to assist in entering and exiting your rail. Available in double-bend (one size fits all chassis), and triple-bend (specify chassis when ordering).  Sold separately, or can be installed when you order your chassis.

Double-Bend Treebars: C058-BB637

Labor to Install Double-Bend Treebars: Call for Pricing.

Triple-Bend Treebars: C058-BB638   (specify chassis)

Labor to Install Triple-Bend Treebars: Call for Pricing.

CHASSIS BRACE KITS

When traveling over the dunes, even the most well-built chassis can experience some frame flex.  Our brace kits are designed to stiffen the front of the chassis, as well as add some upper roll cage reinforcement as well.  Please specify chassis model when ordering.

Chassis Brace Kit : C058-BB639

Chassis Brace Kit +6″ Width: C058-BB640

Labor to Install Brace Kit: Call for Pricing.

DOUBLE REAR ROLLBAR KIT

Adding a 2nd Rear Rollbar to your car can take it’s look, and it’s strength, to the next level.  Our Double Rear Rollbar Kits are TRUE side-to-side rollbars, not 3 piece rollbar “look-alikes”.  Please specify chassis model and cage height when ordering.

Double Rear Rollbar Kit: C058-BB641

Labor to Install Double Rear Rollbar Kit: Call for Pricing.

PICKUP STYLE REAR ROLLCAGE KIT

Going camping for the weekend? Need a place for all those coolers, sleeping bags, tents, etc.? The Pickup Style Rear Rollcage Kit converts your chassis’ rear rollcage into a “bed” for hauling gear, while giving the look of a pickup truck.  Specify chassis model and cage height when ordering. (Not available for Venture, Stalker or Stalker 2+2 Models).

Pickup Style Rear Cage Kit (Cruiser/Encore only): C058-BB672

Labor to Install (Cruiser/Encore only): Call for Pricing.

Pickup Style Rear Cage Kit (All Other Chassis): C058-BB673

Labor to Install (All Other Chassis): Call for Pricing.

Pickup Style Rear Cage Kit (+6″ Width): C058-BB642

Labor to Install (+6″ Width): Call for Pricing.

REPLACEMENT ENGINE UNDERBAR KIT

Damaged engine cages happen all the time. All it takes is a stray rock, tree, or sharp incline, plus a little speed, and your cage can get a bit twisted.  That’s why Berrien makes available replacement underbar kits for all our chassis.  Please specify chassis when ordering.

Underbar Kit, Bolt-On Lower Mount: C058-BB631   (Specify-Warrior or Cruiser only)

Underbar Kit, Slip-Fit Lower Mount: C058-BB631B   (All Other Chassis-Specify Model)

FULL-LENGTH POLISHED ALUMINUM DIAMOND TREAD PLATE FLOOR

Building a show buggy? Our heavy-duty polished aluminum floors are cut to the full-length of your chassis. Made from 3/16″ diamond tread plate, they are the perfect accent to your dream rail. Can be ordered separately (specify chassis), or installed on your chassis at the time of order.

Aluminum Tread Plate Floor: C058-BB630

Labor to Install (2 Seat Chassis Models): Call for Pricing.

Labor to Install (4 Seat Chassis Models): Call for Pricing.

3-PIECE FIBERGLASS BODY

Adding a fiberglass body can help protect you from the elements, and also give you a canvas to express your rail’s character.  Fabricating your own body panels can be a pain, so we did it for you!  Available only for Warrior, 295, 2100, and 4105. Your choice, solid colors or metalflake.

3-Piece Fiberglass Sandrail Body for Warrior/295, Solid Colors: C058-BB302

3-Piece Fiberglass Sandrail Body for Warrior/295, Metalflake Colors:  C058-BB302A

3-Piece Fiberglass Sandrail Body for 2100/4105, Solid Colors:  C058-BB303

3-Piece Fiberglass Sandrail Body for 2100/4105, Metalflake Colors:  C058-BB303A

Available in your choice of 34 Gelcoat Colors:

-18 Metalflake Colors

-16 Solid Colors

Color representations are a close approximation. Actual product color may vary slightly.

• Twister Sandcars
• Cars for Sale
• Service/Custom Work
• Projects and Show Cars
• DVDs and Promotional Items
• V6 - V8 Engines
• Catalogs and Flyers
• Auto Transport

Long Travel Sand Car

This is a long-travel a-arm car.  It has 24  inches of travel front and 20+ rear with over 2 foot of ground clearance, and a 100 inch wheel base.

Two or four seat long travel car chassis start at $6,650. Two seat complete cars start at $17,000.

The cars are available in Chop Top and Hoop style.  The Chop Top cars have a sleeker look, the hoop cars are easier to enter and exit.

The spindle to spindle chassis shown above includes: The Frame, Front A Arms, Heims, Misalignment Bushings, Combo Spindles, Center Steer Rack, Tie Rods with Heims, Steering Shaft, Steering U Joints, Quick Disconnect, Aluminum Steering Bearing Carrier, Urethane Bushings, Grade 8 Bolt Kit, 930 Porsche Stubs, Trailing Arm Hardware, Includes 4 Wheel Bearings Spacers and Clips, 3x3 Trailing Arms, 9 Inch Wider Custom Torsion Housing with Adjusters, Torsion Bars, Spring Plates Since we custom build to our customers specifiations some items shown in pictures are not part of the basic packages.

Custom Frame Options - Chassis Information

Due to popular demand, we now offer the following items to help you get that 4, 6 or 8 cylinder non-VW engine in your sand rail. Custom Fuel Injection Wiring Harnesses and Computer Rework starting at $350 Custom Gas Tanks starting at $140 - Custom Headers starting at $500 a pair Kennedy Adapters starting at $475 - Custom Transmissions starting at $2000 Call us to get everything you need for your application.

We have the largest selection of in-stock sandrail parts in the midwest! 1803 E. 4th Ave, Hutchinson, KS 67501 - 620-662-4557

Buggy Department 951.737.7223

Truck Department 951.737.2999

Forgot your password?

Dont have account? Register Here

Order Status

Where is my order? Check Here

Shopping Cart Summary

• Long Travel & Lift Kits

Long Travel & Lift Kits

CST Lift Kits

Doetsch Lift Kits

Eibach Lift & Leveling Kits

HCR UTV Long Travel Kits

Solo Motorsports Long Travel Kits

Total Chaos Long Travel Kits

You are using an outdated browser. Please upgrade your browser or activate Google Chrome Frame to improve your experience.

• Create an account

SPECIAL: Use code QUICK10 to take 10% off any order over AU$200!

Be   quick   -   download   plans   are   currently   50%   off.

The Barracuda R

• The Barracuda Mk II
• The Piranha III
• The Sidewinder Plus
• The Taipan II
• The Trax III
• The Fun Kart III
• The Mini Monster Truck

The Mini Monster Van

Racing clubs, customer buggies, facebook group (builders), facebook page (news), custom projects, the edge products, dune buggy & crosscart plans and parts worldwide.

For   the   offroad   vehicle   enthusiast.

Since 1989 The Edge Products has been the innovator & world leader in lightweight mini buggy design. Our vehicle plans are easy to follow for the home builder and backed up by a comprehensive catalogue of parts and kitsets.

Cutting edge design. Easy to build. Tough-as-nails.

Barracuda R

Barracuda Mk II

Piranha III

Sidewinder Plus

Fun Kart III

Mini Monster Truck

Mini Monster Van

Choose your Edge buggy with our comparison tool!

________________________________________, other products.

Rear Suspension

Quaife Differential

SW & PIR II

Daa front suspension upgrade.

• DESTROYER Tires
• CARRIER BEARINGS
• CARRIER & DRIVELINE COMBOS
• NOISE BE GONE KITS
• CARRIER & GREASE WHIP COMBOS
• DRIVELINE & CARRIER COMBOS
• COMPLETE DRIVETRAIN SOLUTIONS
• DRIVELINE COMPONENTS
• CERTIFIED REBUILDS
• DIY COMPLETE REBUILD KITS
• DIY BEARING & SEAL KITS
• DIFFERENTIAL COMPONENTS
• BEARING & SEAL KITS
• TRANSMISSION COMPONENTS
• STEERING RACK STABILIZERS
• A-ARM BUSHING & SLEEVES
• LIMIT STRAP KITS
• BALL JOINTS
• MOTOR MOUNTS
• WHEEL BEARINGS
• METAL FX WHEEL & TIRE COMBOS
• SANDCRAFT WHEEL & TIRE COMBOS
• DRAIN PLUG KITS
• GATES REDLINE BELTS
• TOOL AND WHIP BAGS
• ISDRA DUNE PERMITS
• DESTROYER TIRES
• RZR XP 1000
• RZR XP 1000 S
• RZR XP Turbo
• RZR Turbo R
• RZR XP Turbo S
• Polaris Tires
• Polaris Wheels
• Can-Am Maverick R
• Can-Am Tires
• Can-Am Wheels
• DESTINATION POLARIS – PRO R
• CUSTOMER APPRECIATION DAY
• DIY INSTALLATION INSTRUCTIONS
• TRACK MY ORDER
• TESTIMONIALS AND REVIEWS
• DEALER LOCATOR
• DEALER SIGNUP
• JOIN TEAMRCR
• JOIN DIY UTV'S FACEBOOK GROUP
• SANDCRAFT CATALOGS
• SANDCRAFT MOTORSPORTS LIMITED WARRANTY
• DESTROYER TIRE – PUNCTURE WARRANTY
• Products search
• DEALER LOGIN
• CARRIER & DRIVELINE COMBOS
• CARRIER & GREASE WHIP COMBOS
• DRIVELINE & CARRIER COMBOS
• DIY BEARING & SEAL KITS
• BEARING & SEAL KITS
• A-ARM BUSHING & SLEEVES
• METAL FX WHEEL & TIRE COMBOS
• SANDCRAFT WHEEL & TIRE COMBOS
• JOIN DIY UTV’S FACEBOOK GROUP

Long Travel Kit

[ux_banner bg=”https://sandcraftmotorsports.com/wp-content/uploads/2016/09/longtravel.jpg” height=”300px” text_color=”light” text_align=”center” text_pos=”center” text_width=”70%” parallax_text=”6″ parallax=”3″ animate=”fadeInRight” effect=”sliding-glass”]

by Sandcraft Motorsports

[/ux_banner]

[tabgroup title=”Kit Information”] [tab title=”Re-Designed Front Frame”]

Comments are closed.

> About Us > Contact Us > Track My Order > Shipping & Returns > Frequently Asked Questions > Instructions & Videos > Sandcraft Catalogs > Dealer Locator

Contact US TODAY

Strategy Call Inquiry

Interview/press coverage inquiry, speaking inquiry.

• Business / Race Team Name *
• Address * Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country Afghanistan Albania Algeria American Samoa Andorra Angola Anguilla Antarctica Antigua and Barbuda Argentina Armenia Aruba Australia Austria Azerbaijan Bahamas Bahrain Bangladesh Barbados Belarus Belgium Belize Benin Bermuda Bhutan Bolivia Bonaire, Sint Eustatius and Saba Bosnia and Herzegovina Botswana Bouvet Island Brazil British Indian Ocean Territory Brunei Darussalam Bulgaria Burkina Faso Burundi Cambodia Cameroon Canada Cape Verde Cayman Islands Central African Republic Chad Chile China Christmas Island Cocos Islands Colombia Comoros Congo, Democratic Republic of the Congo, Republic of the Cook Islands Costa Rica Croatia Cuba Curaçao Cyprus Czech Republic Côte d'Ivoire Denmark Djibouti Dominica Dominican Republic Ecuador Egypt El Salvador Equatorial Guinea Eritrea Estonia Eswatini (Swaziland) Ethiopia Falkland Islands Faroe Islands Fiji Finland France French Guiana French Polynesia French Southern Territories Gabon Gambia Georgia Germany Ghana Gibraltar Greece Greenland Grenada Guadeloupe Guam Guatemala Guernsey Guinea Guinea-Bissau Guyana Haiti Heard and McDonald Islands Holy See Honduras Hong Kong Hungary Iceland India Indonesia Iran Iraq Ireland Isle of Man Israel Italy Jamaica Japan Jersey Jordan Kazakhstan Kenya Kiribati Kuwait Kyrgyzstan Lao People's Democratic Republic Latvia Lebanon Lesotho Liberia Libya Liechtenstein Lithuania Luxembourg Macau Macedonia Madagascar Malawi Malaysia Maldives Mali Malta Marshall Islands Martinique Mauritania Mauritius Mayotte Mexico Micronesia Moldova Monaco Mongolia Montenegro Montserrat Morocco Mozambique Myanmar Namibia Nauru Nepal Netherlands New Caledonia New Zealand Nicaragua Niger Nigeria Niue Norfolk Island North Korea Northern Mariana Islands Norway Oman Pakistan Palau Palestine, State of Panama Papua New Guinea Paraguay Peru Philippines Pitcairn Poland Portugal Puerto Rico Qatar Romania Russia Rwanda Réunion Saint Barthélemy Saint Helena Saint Kitts and Nevis Saint Lucia Saint Martin Saint Pierre and Miquelon Saint Vincent and the Grenadines Samoa San Marino Sao Tome and Principe Saudi Arabia Senegal Serbia Seychelles Sierra Leone Singapore Sint Maarten Slovakia Slovenia Solomon Islands Somalia South Africa South Georgia South Korea South Sudan Spain Sri Lanka Sudan Suriname Svalbard and Jan Mayen Islands Sweden Switzerland Syria Taiwan Tajikistan Tanzania Thailand Timor-Leste Togo Tokelau Tonga Trinidad and Tobago Tunisia Turkey Turkmenistan Turks and Caicos Islands Tuvalu US Minor Outlying Islands Uganda Ukraine United Arab Emirates United Kingdom United States Uruguay Uzbekistan Vanuatu Venezuela Vietnam Virgin Islands, British Virgin Islands, U.S. Wallis and Futuna Western Sahara Yemen Zambia Zimbabwe Åland Islands Country
• Point of Contact * First Last
• Contact Phone *
• Business / Team Phone *
• Business / Team Email *
• Facebook Account
• Instagram Account

Current Race Team Information

List of current sponsorships.

• I am not sponsored yet
• Briefly describe your racing experience:

Image Unavailable

• To view this video download Flash Player

XL Flag Elektrostal Moscow oblast | landscape flag | 2.16m² | 23sqft | 120x180cm | 4x6ft - 100% Made in Germany - long lasting outdoor flag

Purchase options and add-ons, about this item.

• 100% Made in Germany » ... because the first impression last, quality flag for representative purposes *****
• State-of-the-art High-Tech Outdoor Fabric » One air-permeable 110 GSM Polyester to keep wind forces low and lifetime high
• Mirrored Back » Image printed on the front, mirrored image 100% visible on the rear side
• Landscape flag | 2.16m² | 23sqft | 120x180cm | 4x6ft
• Show your pride for your hometown with the Elektrostal flag! Made with quality materials and vibrant colors, this flag is the perfect way to display your patriotism and love for your city. Fly it proudly at home, at events, or even in your car. Get yours today and show your Elektrostal pride!
• The flag of Elektrostal, Moscow Oblast, is a striking combination of Old Glory red, representing strength and courage at 81%, complemented by a subtle touch of light grey at 5% for balance and harmony. The bold black stripe at 3% adds a touch of sophistication, while the shimmering gold stripes at 3% each symbolize prosperity and success. The flag is completed with a touch of very dark grey at 1%, representing the city s resilience and
• Elektrostal Moscow oblast

Product information

Warranty & support, looking for specific info, product description.

Flag: Elektrostal Moscow oblast landscape flag | 2.16m² | 23sqft | 120x180cm | 4x6ft Elektrostal Moscow oblast Elektrostal obwód moskiewski , flaga ???????????? ?????????? ??????? Since we know how important your external presentation is, we print our Elektrostal Moscow oblast flag for your representative appearance using the most modern machines in Germany. To ensure your maximum flexibility, we have equipped the flags with quality metal eyelets, to let you simply attach these flags to any flagpole. To let you use the flags for a long time, we have strengthened the flag using double safety seams and a tear proof strap at the side of the pole. Due to the quality of this business flag, you show a particular degree of the closeness to Elektrostal Moscow oblast. Details about this flag This landscape Elektrostal Moscow oblast flag is a quality product Made in Germany made of 110g/m² gloss polyester. This Elektrostal Moscow oblast flag is wind- and weather-resistant and highly durable. The flag colors are intensive and UV-resistant. This flag is specially made for outer space. This Elektrostal Moscow oblast flag will be delivered with a double safety-seam as well as with 2 metal eyelets to hoist at the flag pole. The metal eyelets give you great flexibility for placing this flag on any flagstaff. The mast side is reinforced with a white hem. The quality flag material and the metal eyelets will take care of a long endurance of this Elektrostal Moscow oblast flag. If required, the flag can be washed at 60 degrees Celsius. Recommended height of flag pole Elektrostal Moscow oblast flags of 2.16m² | 23sqft | 120x180cm | 4x6ft look best with flagpoles of around 6m | 18ft height. Need a bigger size or an other configuration? We can provide bigger sizes, other configurations, exclusive indoor ...

Customer reviews

Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.

To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.

No customer reviews

• Amazon Newsletter
• About Amazon
• Accessibility
• Sustainability
• Press Center
• Investor Relations
• Amazon Devices
• Amazon Science
• Sell on Amazon
• Sell apps on Amazon
• Supply to Amazon
• Protect & Build Your Brand
• Become an Affiliate
• Become a Delivery Driver
• Start a Package Delivery Business
• Advertise Your Products
• Self-Publish with Us
• Become an Amazon Hub Partner
• › See More Ways to Make Money
• Amazon Visa
• Amazon Store Card
• Amazon Secured Card
• Amazon Business Card
• Shop with Points
• Credit Card Marketplace
• Reload Your Balance
• Amazon Currency Converter
• Your Account
• Your Orders
• Shipping Rates & Policies
• Amazon Prime
• Returns & Replacements
• Manage Your Content and Devices
• Recalls and Product Safety Alerts
• Conditions of Use
• Privacy Notice
• Consumer Health Data Privacy Disclosure
• Your Ads Privacy Choices