ohio cdl pre trip inspection evaluation score sheet

FREE Ohio CDL Pre-Trip Inspection Practice Test 2024 | OH

Ready to earn your pre-trip inspection endorsement? Our free Ohio CDL Pre-Trip Inspection Practice Test is designed to make sure that you are. Earning this endorsement is important because knowing how to conduct a pre-trip inspection before every load you deliver will help keep yourself and others out of danger. Our practice test covers all the important elements of a good pre-trip inspection, including: brake system, coupling system, lights and reflectors, fluid levels (oil, radiator, etc), steering system, suspension system, security of trailer doors and load, tire inflation and tread and much, much more. Here are some sample test questions: For manual slack adjusters, the brake pushrod should not move more than how much? What releases the fifth wheel locking jaw so the trailer can be uncoupled?

Our practice test has 30 multiple choice questions in all and you need to answer at least 24 of them correctly to pass. If you do not pass, or if you do pass and just want to double-check your knowledge, you can retake the test as many times as you like. Each time you take the test the questions will be reordered. Taking this practice test now is your chance to see what the state pre-trip inspections endorsement test is like before you take it. You’ll get the chance to practice answering questions that may show up on the actual test! Ready to begin practicing? Get started on our practice test right now.

Ohio CDL Pre-Trip Inspection Overview:

Get the latest (2024) official OH CDL Manual.

Select Another OH CDL Practice Test

• General Knowledge Test 1
• General Knowledge Test 2
• General Knowledge Test 3
• OH CDL Air Brakes Test 1
• OH Combination Vehicles Test 1
• OH CDL HazMat Test 1
• OH CDL Tanker Vehicles Test 1
• OH Double/Triple Trailers Test 1
• OH Passenger Vehicles Test 1
• OH CDL School Bus Test 1
• OH CDL Pre Trip Inspection Test 1 (you are here)
• General Knowledge Test Simulator

• Free Practice Tests

Commercial Driving

• Introduction

Getting a CDL

• Fees and costs

CDL Types & Permits

Endorsements & Restrictions

CDL Exam Preparation

Written exams

Practical exams

• Skills test
• Pre-trip inspection
• TSA background check
• Retake policy

CDL Maintenance

ELDT Training & Certification

CDL how-to guides

Mastering the CDL Pre-Trip Inspection Exam: A Complete Guide

Learn how to conduct thorough pre-trip inspections with our guide, a critical component for commercial vehicle safety.

Written by Andrei Zakhareuski. With over 16 years of expertise, Andrei leads Driving-Tests.org, a top online resource for driver education. His leadership has established vital partnerships with over 2,600 libraries, educational bodies, and state agencies.

The CDL Pre-Trip Inspection Exam is an integral part of obtaining your commercial driver’s license. This guide covers Class A and Class B pre-trip inspections, provides a checklist, and offers tips for memorizing the inspection process.

​ Start a free Pre-Trip Inspection practice test:

• Alabama - AL - Alabama Pre-Trip Inspection Practice Test
• Alaska - AK - Alaska Pre-Trip Inspection Practice Test
• Arizona - AZ - Arizona Pre-Trip Inspection Practice Test
• Arkansas - AR - Arkansas Pre-Trip Inspection Practice Test
• California - CA - California Pre-Trip Inspection Practice Test
• Colorado - CO - Colorado Pre-Trip Inspection Practice Test
• Connecticut - CT - Connecticut Pre-Trip Inspection Practice Test
• Delaware - DE - Delaware Pre-Trip Inspection Practice Test
• District of Columbia - DC - District of Columbia Pre-Trip Inspection Practice Test
• Florida - FL - Florida Pre-Trip Inspection Practice Test
• Georgia - GA - Georgia Pre-Trip Inspection Practice Test
• Hawaii - HI - Hawaii Pre-Trip Inspection Practice Test
• Idaho - ID - Idaho Pre-Trip Inspection Practice Test
• Illinois - IL - Illinois Pre-Trip Inspection Practice Test
• Indiana - IN - Indiana Pre-Trip Inspection Practice Test
• Iowa - IA - Iowa Pre-Trip Inspection Practice Test
• Kansas - KS - Kansas Pre-Trip Inspection Practice Test
• Kentucky - KY - Kentucky Pre-Trip Inspection Practice Test
• Louisiana - LA - Louisiana Pre-Trip Inspection Practice Test
• Maine - ME - Maine Pre-Trip Inspection Practice Test
• Maryland - MD - Maryland Pre-Trip Inspection Practice Test
• Massachusetts - MA - Massachusetts Pre-Trip Inspection Practice Test
• Michigan - MI - Michigan Pre-Trip Inspection Practice Test
• Minnesota - MN - Minnesota Pre-Trip Inspection Practice Test
• Mississippi - MS - Mississippi Pre-Trip Inspection Practice Test
• Missouri - MO - Missouri Pre-Trip Inspection Practice Test
• Montana - MT - Montana Pre-Trip Inspection Practice Test
• Nebraska - NE - Nebraska Pre-Trip Inspection Practice Test
• Nevada - NV - Nevada Pre-Trip Inspection Practice Test
• New Hampshire - NH - New Hampshire Pre-Trip Inspection Practice Test
• New Jersey - NJ - New Jersey Pre-Trip Inspection Practice Test
• New Mexico - NM - New Mexico Pre-Trip Inspection Practice Test
• New York - NY - New York Pre-Trip Inspection Practice Test
• North Carolina - NC - North Carolina Pre-Trip Inspection Practice Test
• North Dakota - ND - North Dakota Pre-Trip Inspection Practice Test
• Ohio - OH - Ohio Pre-Trip Inspection Practice Test
• Oklahoma - OK - Oklahoma Pre-Trip Inspection Practice Test
• Oregon - OR - Oregon Pre-Trip Inspection Practice Test
• Pennsylvania - PA - Pennsylvania Pre-Trip Inspection Practice Test
• Rhode Island - RI - Rhode Island Pre-Trip Inspection Practice Test
• South Carolina - SC - South Carolina Pre-Trip Inspection Practice Test
• South Dakota - SD - South Dakota Pre-Trip Inspection Practice Test
• Tennessee - TN - Tennessee Pre-Trip Inspection Practice Test
• Texas - TX - Texas Pre-Trip Inspection Practice Test
• Utah - UT - Utah Pre-Trip Inspection Practice Test
• Vermont - VT - Vermont Pre-Trip Inspection Practice Test
• Virginia - VA - Virginia Pre-Trip Inspection Practice Test
• Washington - WA - Washington Pre-Trip Inspection Practice Test
• West Virginia - WV - West Virginia Pre-Trip Inspection Practice Test
• Wisconsin - WI - Wisconsin Pre-Trip Inspection Practice Test
• Wyoming - WY - Wyoming Pre-Trip Inspection Practice Test

​ CDL Class A Pre-Trip Inspection

Engine Compartment Inspection

Includes checking for leaks, belt tension, and the condition of hoses, among other components.

Cab Check/Engine Start

Involves inspecting the cab’s interior, gauges, and starting the engine to check for abnormalities.

Brake Check

Focuses on air brake systems, including air brake checks and the parking brake test.

​ CDL Class B Pre-Trip Inspection

Vehicle Overview

Begin with a general overview of the vehicle, checking for obvious signs of damage or issues.

External Inspection

Inspect all external components, including tires, lights, and mirrors.

Internal Inspection

Check all internal controls, ensuring everything is functional and within reach.

​ Pre-Trip Inspection Checklist

• Lights and reflector s: Ensure all are clean and functional.
• Engine oil and coolant levels : Check for adequate levels.
• Steering mechanism : Ensure it’s secure and functioning.
• Horn : Test for functionality.
• Windshield wipers : Check for operability and condition.
• Mirror s: Adjust for optimal visibility.
• Emergency equipment : Ensure presence and accessibility.
• Air brake system : Test for leaks and proper pressure.

​ Tips for Memorizing the Pre-Trip Inspection for CDL

• Create a Routine : Develop a consistent order in which to conduct your inspection.
• Use Mnemonics : Create acronyms or phrases to help remember the steps.
• Practice Regularly : Hands-on practice is the most effective way to memorize the inspection process.
• Visual Aids : Use diagrams or checklists as visual reminders.

Pro Tip : Practice the pre-trip inspection in a real-world setting. The more you perform the inspection in a practical environment, the more natural it will become.

Remember, the pre-trip inspection is not just a test requirement – it’s a fundamental safety practice every commercial driver should master. For more resources and detailed guides, visit Driving-Tests.org .

Secure your CDL with confidence!

Our exclusive CDL Premium program offers comprehensive online training with an ELDT certificate, authentic exam questions, and a solid Pass Guarantee, starting at only $49. Ideal for first-time applicants, seasoned drivers, and those new to the U.S. road rules.

Explore CDL Premium

Was this page helpful?

• Start a free Pre-Trip Inspection practice test:
• CDL Class A Pre-Trip Inspection
• CDL Class B Pre-Trip Inspection
• Pre-Trip Inspection Checklist
• Tips for Memorizing the Pre-Trip Inspection for CDL

• Register / Login
• Trucker's Forum
• Paid CDL Training
• Truck Driving Jobs
• CDL Practice Tests
• High Road Training

Pre-Trip Inspection Study Guide

Our Pre-Trip Inspection Study Guide has everything you need to prepare for the Class A CDL Pre-Trip Inspection Exam . Our study guide will cover the pre-trip inspection terminology as well as a thorough list of all of the parts you will be inspecting on the vehicle. For each part you will be inspecting there will also be a list of items you will be checking for. Our study guide is broken down into the following sections:

• What You Need to Know About Pre-Trip Inspection

Pre-Trip Inspection Practice Questions

• Pre-Trip Inspection Checklist

Pre-Trip Inspection Videos

Pre-trip inspection printable resources, what you need to know about the pre-trip inspection.

The Pre-Trip Inspection is a thorough inspection of the vehicle and all of its major systems. Inspecting the vehicle before driving each day is a Federal requirement and normally takes about 15 minutes. It must be logged in your logbook as "on duty not driving."

You will have to do thorough safety inspections of the coupling system, the vehicle lights, engine compartment, tires and brakes, the chassis, the fuel tanks, and an in-cab inspection.

The following information is a brief summary of Daniel's Complete Pre-Trip Inspection taken from our oustanding free PDF download:

Engine Compartment

You will be checking the engine compartment for any sort of leaks. You will also be checking to see if all components are properly mounted and secured. None of the mounts must be cracked, bent, or broken.

You will be checking all hoses to make sure they aren't leaking, frayed, or sliced and the fluid levels including the oil level, the coolant, and the power steering fluid.

You must check the components like the water pump, the power steering pump, and the alternator to make sure nothing is leaking, the belts are not frayed, and that everything is properly mounted and secured.

From inside the engine compartment you will also find the steering system, the front suspension system, and the front brake system. All components of these systems must be properly mounted and secured without anything being cracked, bent, or broken. Finally you will be checking the tires, rims, and axle seals to make sure the tires are properly inflated, the rim isn't bent or cracked, and the axle seals are not leaking.

Fuel Tank And Battery Area

You will be standing along the side of the tractor doing a series of checks on the mirrors, fuel tanks, batteries, exhaust system, and more. You will check to make sure nothing is bent, cracked, broken, or leaking.

Check the mirrors, door hinges, door handle to make sure nothing is cracked, bent, or broken. Check to make sure there is no fuel leaking and that the fuel cap is secured and the gasket is not missing.

Check the exhaust system to make sure nothing is cracked, bent, or broken. Check the driveshaft, cat walk, and steps to make sure nothing is cracked, bent, or broken.

Check the frame and crossmembers for structural integrity. Check the air lines going to the trailer to make sure they're properly connected and that there are no abrasions, bulges, or cuts. Make sure the gaskets are present.

Check the suspension system and brakes on the drive axles, making sure nothing is cracked, bent, or broken. Make sure the brake linings are the proper thickness and that the air bags and properly inflated. Inspect the brake chambers, slack adjusters, and pushrods are properly mounted and secure. Not Cracked, Bent, or Broken. With the brakes released and pulled by hand, the Push Rod should not move more than 1 inch.

Check the rims, tires, and axle seals of the drive tires for proper inflation, no leaks around the seal, and the lugs are all present and secured.

Coupling System

You will be standing where the tractor and trailer are connected and you'll start by checking the electrical line and air lines to make sure they're properly mounted and secure at both ends. No abrasions, bulges or cuts. Not leaking air. Make sure the electrical line has no wires exposed. Check the gladhands to make sure the seals are in good condition, no cracks or signs of dry rotting. Not leaking air.

Check the skid plate of the fifth wheel and the apron of the trailer to make sure there is no debris and nothing is cracked, bent, or broken. Make sure the fifth wheel is properly greased. Also make sure there is no gap in between the fifth wheel and the trailer apron once the tractor and trailer are coupled. Make sure the kingpin of the trailer is properly mounted and not cracked, bent, or broken and that the locking jaws of the fifth wheel are properly secured when the tractor and trailer are coupled.

Check the mounting bolts where the fifth wheel attaches to the tractor frame. Make sure there are no missing bolts and that everything is secured properly. Check the locking pin if you having a sliding fifth wheel to make sure it's properly locked into place.

Make sure that there is the proper clearance space between the tractor mudflap and the trailer landing gear so that they don’t hit each other when making a turn.

You will start inspecting the trailer at the head board, which is the front wall of the trailer. Make sure there are no holes or missing rivets. Check the landing gear to make sure it is properly mounted and secure. Not cracked, bent, or broken. Make sure the fully raised and the handle is secure in the cradle when the tractor and trailer are coupled.

Check the frame and crossmembers under the trailer to make sure they're not cracked, bent, or broken. Check the tandem frame and release pins to make sure the frame is in good condition and the release handle and locking pins are in the fully locked position.

You will check the entire suspension and brake system for the trailer tandems the same way you did for the drive axles of the tractor. You will also make sure the mudflaps are properly secured. For dual tires check to see that there is proper space between the tires and there is nothing stuck between the tires.

Check the rear door and hinges to make sure they are properly mounted and nothing is cracked, bent, or broken. Make sure the door seals are not worn, torn, or dry rotted.

Light Check

You will be checking all of the lights and reflectors on both the tractor and the trailer. Check the reflectors and reflective tape to make sure they are properly mounted and secure, not cracked, bent, or broken, and clean and illuminated. Check that you have the proper color of amber to the front and sides, and red to the rear.

Start by turning on your marker lights and headlights. Now walk around the entire truck and trailer and point out the lights. Give the function of the light and the location. You should then ask your examiner to help you check your five functions.

While you're sitting in the drivers seat, the examiner will stand to the front of the truck, then behind the trailer. He will then check your Turn Signals, Four Way Flashers and Brake Lights. You must do each function at every location.

The five locations that you must check your lights:

• Front of the Truck
• Both sides of the Truck
• Rear of the Truck
• Both sides of the Trailer
• Rear of the Trailer

The Five Functions you are checking for:

• Left Turn Signal
• Right Turn Signal
• Four Way Flashers
• High Beams/Low Beams
• Brake Lights

In-Cab Inspection

The in-cab inspection and air brake check will cover the various gauges and systems inside the cab along with several tests to make sure you air brake system is working properly.

You will start by checking the following:

• Seat Belt- Properly Mounted and Secure. Not ripped or frayed Adjusts and latches properly.
• Fire Extinguisher- Properly Mounted and Secure. Fully charged
• Three Red Reflective Triangles- My three red reflective triangles are GIVE LOCATION
• Spare Electrical Fuses- My spare electrical fuses are GIVE LOCATION
• Volmeter, Oil Pressure Gauge, Water Temperature Gauge, and Air Pressure Gauge all show proper operation
• City horn and air horn functioning properly
• The windshield and mirrors are clean, no cracks or breaks, no obstructions. The mirrors are in proper adjustment.
• Windshield Wipers and Washers - Demonstrate that the washers work by spraying the windshield. The Wipers are: Properly Mounted and Secure and operate smoothly. The blades aren't cracked or dry rotten.
• Heater and Defroster - Demonstrate that both the Heater and Defroster are working properly.
• Lighting Indicators - Left Turn, Right Turn, Four Way Flashers, and High Beams.

Trailer Parking Brakes - Set the Trailer Brake, release the tractor brake, and then tug lightly on the trailer.

Tractor Parking Brakes- Then set the Tractor Brake, release the trailer brake, and then tug lightly on the tractor.

Service Brake Check - Release both Tractor and Trailer Brakes. Now drive at idle speed. Apply the Service Brake to make sure you come to a complete stop, and that it doesn't pull to the left or right when applying the brakes.

Air Brake Test

The air brake test will consist of a leakdown test to make sure your air brakes aren't leaking air and losing pressure. It will also test the warning lights and buzzer to make sure the driver gets the proper warning if the air pressure drops too low.

There are three stages to an Air Brake Test

#1: Applied Pressure Test

#2: Warning Light and Buzzer

#3 Tractor/Trailer Protection Valve Pop Out

Applied Pressure Test: Build the air pressure to governor cut out. Put the truck in the lowest gear. Then turn off the engine Immediately turn the engine back on. Push in both the tractor and trailer valves. (This will release the parking brakes.) Push and hold the Brake pedal fully. Allow the gauges to stabilize. Announce the gauges have stabilized and the Primary and Secondary PSI. With the Brakes fully pressed, you should not lose more than 4 PSI in one minute. Announce that you are listening for air leaks during that minute.

Warning Light and Buzzer Test: Pump down on the Brake pedal until the warning light and buzzer comes on, at or before 60 PSI.

Tractor/Trailer Protection Valve Pop Out Test: Pump down on the brake pedal until both the tractor and trailer protection valves pop out. They should both pop out between 40 and 20 PSI.

We have a ton of Pre-Trip Inspection Practice Questions along with the answers and a complete scoring system in our Free Online CDL Practice Tests :

The Engine Compartment Section will include questions about checking the oil level and coolant levels, inspecting belt-driven engine components (like the water pump, alternator, and air compressor), and the safety devices required in the cab. There will also be questions regarding the windshield wipers and free play in the steering wheel.

The Lights And Brakes Section will include questions about dashboard indicator lights, inspecting the parking brakes, and doing a leakdown test on the air brakes. It will also include questions about the low air pressure warning signal and testing your air horn and city horn.

The Suspension And Steering Section will include questions about the tractor protection valve, inspecting the steering box, and inspecting many suspension system parts. It will also include questions about welds being present on tire rims and the minimum tread depth required on steering axle tires.

The Tires And Coupling Devices Section will include questions about shiny trails or rusty threads on lug nuts, inspecting the battery box and cover, and inspecting electrical lines. It will also contain questions about inspecting the coupling devices and the fifth wheel skid plate.

The Emergency Equipment And Fifth Wheel Section will include questions about additional emergeny equipment required by school buses, inspecting the gap between the kingpin apron and the fifth wheel skid plate, and the landing gear securement. It will also contain questions about inspecting driver mirrors and the trailer frame.

Pre-Trip Inspection Checklist - Class A

Our pre-trip inspection checklist covers every part of the truck from front to back, both inside and outside of the truck. It covers the air brakes, suspension parts, steering components, wheels and rims, fuel tanks, batteries, lights, and more. It also covers the air brake tug test and checks for everything under the hood including alternator, water pump, fuel pump, fluids, and more.

This is a super handy checklist to study anytime you have a few minutes to spare:

Pre-Trip Inspection Checklist - Free Word Document Download (Editable Version)

Pre-Trip Inspection Checklist - Free PDF Download (Print Version)

Pre-Trip Inspection Video By Apex CDL Institute

Jeff from Apex Institute does an in-depth explanation of the entire pre-trip inspection process. This video is loaded with tips that go beyond the CDL test to help drivers really understand how to identify problems.

Pretrip Inspection Self-Test By CDL College

The Pretrip Inspection Self-Test By CDL College is really unique. It's a silent video which will show you the part you're inspecting and then gives you a few seconds to figure out what you should be checking for before giving you the answer. Definitely check this one out. Great for practicing before the CDL exam.

Pre-Trip Inspection Video By Averitt Express

This is a complete back to front pre-trip inspection of a truck and trailer by Averitt mainentance associate Kevin Breeding. This thorough pre-trip inspection covers all inportant points of inside the cab, lights, engine, the tractor itself and the trailer.

We have included two print versions of the pre-trip inspection process from Daniel. The first is the entire pre-trip inspection and the second is an abbreviated checklist for the inspection.

• PDF: Daniel's Pre-trip Inspection (Print Version)
• PDF: Daniel's Pre-trip Inspection Checklist (Print Version)

Why Join Trucking Truth?

• The High Road Training Program
• The High Road Article Series
• The Friendliest Trucker's Forum Ever!
• Email Updates When New Articles Are Posted

Apply For Paid CDL Training Through TruckingTruth

Did you know you can fill out one quick form here on TruckingTruth and apply to several companies at once for paid CDL training? Seriously! The application only takes one minute. You will speak with recruiters today. There is no obligation whatsoever. Learn more and apply here:

• Privacy Policy

• CDL Practice Test
• OH Pretrip CDL Practice Test - 1

FREE 2024 Ohio (OH) Pretrip Practice Test 1

2024 oh pretrip information.

The pretrip exam is an oral exam that you will need to pass after you have taken all of your CDL written tests, and are at the exam station for your pretrip, skills, and road test exams. During the pretip exam you will need to verbally check components to make sure that the vehicle is safe for operation. In some states there can be over 100 items to check on a tractor trailer.

The exam doesn’t stop at just listing the components, you will have to name the item by its proper name and say at least 3-5 things you would check that item for. Don’t’ forget to mention what you are going to check the 3-5 things for as well. This is a very detailed exam on the vehicle and its parts be ready.

As an example, the air compressor would need checked, we are going to check belts (if not gear driven), air lines, and securement of the air compressor. Because we mentioned belts (if not gear driven) we have to check for play in the belt, check it for wear, and crack. Moving on the air lines, need to be secure, no breaks or cracks, and no leaks. Finally check all bolts, nuts, and securement pieces to make sure none are loose or missing.

Based on the 2024 OH CDL Driver's Manual

Questions appearing on this cdl practice test:, when doing the pre-trip, you should tell the examiner each item you are checking and 2-3 things you check each item for., should you do an overview of your vehicle as you approach it (including looking for leaks, leaning, or excessive damage), when checking the lights at the front of the vehicle what should you check for, when checking the windshield, what should you be looking for, when opening the hood, you should check, checking the mirrors on the outside of the vehicle you should check for, in the engine compartment there are four fluids you must check, they are, in the engine compartment there are four major belt or gear driven components. what are they, what should you check each of the fluids in the engine compartment for, what are the main components of the steering controls found in the engine compartment, what should you check the steering linkage for, which of the following does not get checked in the engine compartment, which of the following is not an engine compartment belt, the leaf springs, shocks, u-bolts, shackles, and air bags are part of what system, hoses in the engine compartment should be checked for, the engine belts should be checked for, brake lines should be checked for, air chambers are, air chambers should be checked for, the slack adjuster is part of the braking system, what is the maximum play allowed with the brakes off, brake pads should be checked for, brake drums, brake drums (or discs) must not have cracks longer than:, tire tread depth depends on the axel. the depth should be no less than ______ for the steer axel, and _____ for any other axel., retreaded tires can be on any axel., tires should be checked for, you should check rims for dents, cracks, illegal welds, valve stem, and that they are tight and secure., all rims have a spacer., lug nuts (that hold the rim to the axle) should be checked for, the hub oil seal should be, differences between the steer axel and the rest of the axles are: tread depth, spacers or budding rims, space between the tires, torsion bars, and air bags., you can leave the hood open when moving on with the pre-trip., more ohio cdl practice test: ( indicates current test), general knowledge practice test 1, general knowledge practice test 2, general knowledge practice test 3, general knowledge practice test 4, general knowledge practice test 5, general knowledge practice test 6, general knowledge practice test 7, general knowledge practice test 8, haz mat practice test 1, haz mat practice test 2, haz mat practice test 3, haz mat practice test 4, school bus practice test 1, school bus practice test 2, school bus practice test 3, school bus practice test 4, passenger vehicles practice test 1, passenger vehicles practice test 2, passenger vehicles practice test 3, passenger vehicles practice test 4, air brakes practice test 1, air brakes practice test 2, air brakes practice test 3, air brakes practice test 4, combination vehicles practice test 1, combination vehicles practice test 2, combination vehicles practice test 3, combination vehicles practice test 4, combination vehicles practice test 5, double/triple trailers practice test 1, double/triple trailers practice test 2, double/triple trailers practice test 3, tanker vehicles practice test 1, tanker vehicles practice test 2, tanker vehicles practice test 3, pre-trip inspection practice test 1, pre-trip inspection practice test 2, pre-trip inspection practice test 3, ohio free pretrip videos, engine compartment pretrip inspection, inside cab pretrip inspection, rear of tractor pretrip inspection, exterior light pretrip inspection, complete trailer pretrip inspection.